Advertisement

Quick Links

LAVADORA

WASHING MACHINE

ZWF388
E
MANUAL DE USO
USER MANUAL
GB
35.293.017/1

Advertisement

Table of Contents
loading

Summary of Contents for Zanussi ZWF388

  • Page 1: Washing Machine

    LAVADORA WASHING MACHINE ZWF388 MANUAL DE USO USER MANUAL 35.293.017/1...
  • Page 2: Child Safety

    Child safety • Keep all detergents in a safe place out of children’s reach. • Children are often not aware of how dangerous • Make sure that children or pets do not climb into electrical appliances can be. When the machine is the drum.
  • Page 3: Installation Instructions

    Installation instructions It is dangerous to alter the specifications or attempt to modify this product in any way. Care must be taken to ensure that the appliance does not stand on the electrical supply cable. Any electrical work required to install this appliance should be carried out by a qualified electrician or competent person.
  • Page 4: Installation

    Installation Transit security bars Hydraulic connection Before starting the machine up, the transport There should be a COLD WATER tap near the security bars must be removed as follows: washing machine with a screwing on connection You are advised to keep all the transport security pipe of 3/4 gas for the water supply, a sink, a wash bars.
  • Page 5: Electrical Connections

    1,5 m. Max. IMPORTANT: The distance from the floor to the Electrical connections highest part of the hose should be between 60 to Before plugging the appliance make sure that: 90 cm. (It is advised to be between 60 and 70 cm). 1º.
  • Page 6: Your New Washing Machine

    Your new washing machine This new machine meets all modern requirements for effective treatment of laundry with low water, energy and detergent consumption. • The balance control device reduces the risk of instability in machine movement and it guarantees a quieter operation.
  • Page 7: Control Panel

    Control panel 1. Detergent dispenser drawer 5. INICIO / PAUSA button After selecting the required programme, by the Programme option buttons programme selector (see section 9), press this Depending on the programme, different option button to start the machine; the corresponding buttons can be combined.
  • Page 8: Programme Progress Display

    8. Spin speed selector dial or • If you need to stop the machine to put in more laundry (having selected DELAY START option no spin / rinse hold options first), proceed as follows: 1. Depress START / PAUSE button. 2.
  • Page 9: Programme Selector Dial

    9. Programme selector dial The selector dial can be turned either clockwise or counter-clockwise. Use this selector dial to select the required programme. At the end of each programme the selector dial must be turned to position “ ”, to switch off the machine.
  • Page 10: Washing Hints

    Laundry weights Washing hints The following weights are indicative: bathrobe 1200 g Sorting the laundry napkin 100 g Follow the wash code symbols on each garment quilt cover 700 g label and the manufacturer’s washing instructions. Sort the laundry as follows: sheet 500 g whites, coloureds, synthetics, delicates, woollens.
  • Page 11: Detergents And Additives

    Ink: depending on the type of ink, moisten the fabric Quantity of detergent to be used first with acetone (*), then with acetic acid; treat any The type and quantity of detergent will depend on residual marks on white fabrics with bleach and then the type of fabric, load size, degree of soiling and rinse thoroughly.
  • Page 13: Operating Sequence

    Operating sequence Before washing your first load of laundry, we recommend that you run a cotton cycle at 60° C, with the machine empty, in order to remove any manufacturing residue from the drum and tub. Pour half of the normal amount of detergent into the main wash compartment and start up the machine.
  • Page 14: Interrupting A Programme

    7. OPTIONAL! Select, if required, 10. Interrupting a programme “DELAY START” option button Depress INICIO / PAUSA button to interrupt a running programme, the corresponding light will Push “DELAY START” button as many times as begin flashing. Press this button again to re-start the necessary until the corresponding light to the programme.
  • Page 15: Programme Table

    Programme table Washing programmes for cotton and linen Programme selector Washing Load Stains and type of fabric Description Possible option dial programme position Prelavado Manchas Inicio diferido Wash at 90° C 5 kg Lavado rápido For heavily soiled cotton items. 3 rinses BLANCOS ALGODÓN...
  • Page 16 Programme table Washing programmes for synthetics, mixed fabrics, delicates, wool Programme selector Washing Load Possible option Stains and type of fabric Description dial programme position Prelavado Media carga Special programme for synthetic Wash at 40° C PLANCHADO 2 kg Inicio diferido fabrics, which makes ironing 4 rinses FÁCIL...
  • Page 17 Programme table Special washing programmes Programme selector Washing Load Possible option Stains and type of fabric Description dial programme position With this programme it is possible to rinse and spin Inicio diferido Lavado rápido garments which have been 3 rinses 5 kg ACLARADOS Rinse hold (*)
  • Page 18: Maintenance

    Maintenance 1. Bodywork 3. Cleaning of the drainage area Clean the outside of the machine with warm water The drainage area must be cleaned if the pump has and a neutral, non-abrasive household detergent. been blocked with objects such as buttons, safety Rinse with clean water and dry with a soft cloth.
  • Page 19: Emergency Emptying Out

    4. The water inlet hose filter 6. Frost precautions If the machine is installed in a place where the If your water is very hard or contains traces of lime temperature could drop below 0°C, proceed as deposit, the water inlet filter may become clogged. follows: It is therefore a good idea to clean it from time to •...
  • Page 20: Something Not Working

    Something not working? Certain problems are due to lack of simple maintenance or oversights, which can be solved easily without calling technical service. Before contacting your local Service Force Centre, please check the following possible problems listed below. During machine operation it is possible that FIN light flashes to indicate that something is not working correctly. •...
  • Page 21: Unsatisfactory Washing Results

    Problems Possible cause - Unsatisfactory washing results: • Little detergent or an inappropriate one has been used. An insufficient amount of detergent leaves the laundry looking grey. • Stubborn stains have not been treated prior to washing. • The correct wash programme has not been selected.
  • Page 22 If you are unable to identify or solve the problem, contact our service centre. Before telephoning, make a note of the model, serial number and purchase date of your machine: the Service Centre will require this information.
  • Page 25 EHPOESL/Z...

Table of Contents