Switching Between Speakerphone And Handset; Call Time Counter; Last Number Redial - Geemarc Ampli600 User Manual

USING THE TELEPHONE
Hands free
● Key in the required number without lifting the handset.
● Use the C key if necessary to cancel and correct a wrong digit.
● Press SPKR and the number will be automatically dialled. The speak-
erphone symbol will appear on the display.
● When the call is answered, simply speak into the microphone located
on the base
● You can adjust the speaker level with the slide button located on the
left side of your telephone.
● To end the call, press the hands free button again.

Switching between Speakerphone and Handset

To stop using speakerphone during a call, simply lift the handset.
To activate speakerphone during a call, press SPKR and replace the head-
set on the cradle at the same time
Hands free calls can also be made using an optional headset –see Optional
Accessories chapter

Call Time Counter

The call time counter will be displayed a few seconds after the phone num-
ber is connected and starts ringing.
To stop the time counter, press C
If you press C twice, the time counter will be reset to 0.

Last Number Redial

The previously dialled number will be automatically redialled
Lift the handset or press SPKR or press Headset
(if headset plugged in)
Await the dial tone and press REDIAL
19