Geemarc Ampli600 User Manual page 17

Area and Long Distance Code Setting
When you use your phone for the first time or if you have moved to a
different area code, you need to enter your area code into the phone. This
assures that when dialing a call out of memory or your phonebook, the
number is formatted properly. To set your area code & LDS Code:
Use ▲ or ▼ to enter your area code. The phone accommodates
Once you have entered your area code, even if you are not using
The LDS Code is your long distance code. In the U.S. your long
distance code is 1. The telephone is pre-set for the U.S.
(NOTE: Do not change the LDS code unless you are leaving the U.S.)
If you wish to change the LDS, use ▲ or ▼ to enter your LDS code.
SETTINGS
Press MUTE
Use ▲ or ▼ to select 'SET PHONE'
Press OK
Use ▲ or ▼ to select 'SET AREA & LDS'
Press OK
up to six (6) digits (allows for International codes).
all six (6) digits, press the OK button until you reach
the 'SET LDS CODE' screen
Press OK to confirm
Press C to exit
17