Toshiba 42XV600A Owner's Manual page 6

7) Never cut, break, modify, twist, bunch up or
bent the cord or apply excessive force or
tension to it.
Never place heavy objects on the cord or allow
it to overheat as this may cause damage, a
fi re or an electric shock. Contact a service
technician if the power cord is damaged.
8) If there is thunder or lightning, never touch
the aerial cable or other connected cables.
You may suffer an electric shock.
Service
1) Never repair, modify or disassemble the TV
by yourself.
It may cause a fi re or an electric shock. Consult
a service technician for inspection and repairs.
2) When a malfunction occurs, or if smoke or
an unusual odor comes from the TV, turn off
the TV and remove the power plug from the
outlet immediately.
Make sure that the smoke or smell has
stopped, then contact a service technician.
If the TV is still used in this condition, it may
cause a fi re or an electric shock.
6
Introduction
3) If the TV is dropped or the cabinet is broken,
turn off the TV and remove the power plug
from the outlet immediately.
If the TV is still power used in this condition,
it may cause a fire or an electric shock. If the
cabinet is broken, be careful when handling the
TV to prevent an injury.
Contact a service technician for inspection and repair.
4) When the TV reaches the end of its useful
life, ask a qualifi ed service technician to
properly dispose of the TV.
Note:
The lamp unit contains a small amount of
mercury. Disposal of mercury may be regulated
due to environmental considerations.
Dispose of the used lamp unit by the approved
method for your area. For disposal or recycling
information, please contact your local authorities.
Cleaning
1) Remove the power plug before cleaning.
Never use solvents such as benzine or thinner
to clean the TV.
• These solvents may distort the cabinet or
damage its fi nish.
• If rubber or vinyl products remain in contact
with the TV for a long time, a stain may result.
If the cabinet becomes dirty, clean it with a soft,
dry cloth.
When cleaning the surface of the LCD display,
wipe the panel surface gently with a soft, dry
cloth.