Toshiba 42XV600A Owner's Manual page 16

C. Colour System
A : Automatic, P : PAL , S : SECAM,
N4 : NTSC 4.43 (MHz), N3 : NTSC 3.58 (MHz)
If the colour of a certain channel is abnormal, the
automatic colour system selection (A) may have
malfunctioned or the sound system selection is
wrong. In this case, select another colour and/or
sound system.
D. Position skip selection
Press s or r to turn the position skip option
on " 8 " or off " ( ".The position will then be
skipped when you select channels with P U or P u .
The " 8 " mark will appear beside the position
number in the banner when you use the Number
buttons on the remote control to tune directly.
E. Channel search operation
Press r to search up the band or s to search down
the band.
Press s or r repeatedly until your desired channel
is displayed.
When a station/satellite is found, it will be displayed.
NEVER PRESS ANY OTHER BUTTONS
WHILE THE SET IS TUNING.
F. Manual Fine Tuning
Press s or r until better picture and sound are
obtained.
G. Label
Station labels appear beside the position display
each time you turn on the TV, select a channel, or
press k .
To change or create station labels:
1) Press s or r repeatedly to select a character for
the first space, then press w .
2) Repeat step 1) to enter the rest of the characters.
If you would like a blank space in the label
name, you must choose a blank space from the
list of characters.
Press Q to store your settings.
Sorting positions
- analogue only -
ATV channels may be moved and stored to the position of
your choice.
1
From the SETUP menu, press s or r to select ATV
Manual Tuning .
16
Getting started
2
3
4
DTV Manual Tuning
This feature is available for service engineers or can be used
for direct channel entry if the multiplex channel is known.
1
2
*(blank space)
3
With the list of channels now showing, press s or r
to select the channel you want to move and press w .
ATV Manual Tuning
Pos. Station
ABCD
1
EFGH
2
IJKL
3
4 MNOP
5
6
7
8
Use s or r to move through the list to your preferred
position. As you do so, the other channels will move
to make room.
Press v to store your move.
Repeat as necessary, and then press P .
- digital only -
From the SETUP menu, press s or r to select DTV
Manual Tuning , and then press Q .
DTV Manual Tuning
WEAK
Signal Strength
Quality GOOD
Channel
Start Scan
Enter the multiplex number using the number buttons
or use v or w to adjust the number up or down. Then
press s to select Start Scan , and press Q . The TV
will start to search for that multiplex.
DTV Manual Tuning
0 New Channels - Total 6
New Pos. Name
2
20
21
22
23
When the multiplex is found, any channels that are
not currently in the channel list will be added and the
channel information will be updated.
Repeat as necessary. Press P to finish.
AVERAGE STRONG
13
Type