Toshiba 42XV600A Owner's Manual page 22

Adjusting the Colour Temperature
Colour Temperature increases the 'warmth' or
'coolness' of the picture by increasing the red or blue tint.
1
From the Advanced Picture Settings menu, press
s or r to select Colour Temperature , and then
press Q .
2
Press v or w to select the Colour Temperature
setting (0 (warm) - 10 (cool)).
Colour Temperature
Colour Temperature
Red - Offset
Green - Offset
Blue - Offset
Red - Gain
Green - Gain
Blue - Gain
Reset
3
Press s or r to select the option you want to adjust,
then press v or w to adjust the setting.
4
Press Q to return to the previous menu.
To return the colour temperature settings to the factory
defaults, select Reset and press Q .
Note:
If Picture Mode is set to AutoView, you can only
adjust Colour Temperature.
Adjusting the Auto Brightness Sensor
When the Auto Brightness Sensor is activated, it
will automatically optimise the backlighting levels to suit
ambient light conditions.
1
From the Advanced Picture Settings menu, press
s to select Auto Brightness Sensor Settings ,
and then press Q .
2
Press v or w to select On and press Q .
Auto Brightness Sensor Settings
Auto Brightness Sensor
Backlight Adjustment Pro
3
Press s to select Backlight Adjustment Pro , and
then press Q .
4
The Backlight Adjustment Pro window will appear.
Press Q again to display the adjustment window.
5
Press v or w to select a point and press s or r to
adjust the level.
Backlight Adjustment Pro
Backlight Control Level
100
Control
Level
0
22
Using the TV's features (General)
5
0
0
0
0
0
0
On
48
Cancel
Reset
Ambient Light
6
Press Q to confirm the adjustment.
To cancel the adjustment when selecting a point, select
Cancel and press Q .
To return the settings of all points to the factory
defaults, select Reset , and then press Q .
Using the Active Backlight Control
In order to improve screen visibility, the active backlight
control sets the screen brightness automatically during
dark scenes.
1
From the Advanced Picture Settings menu, press
s or r to select Active Backlight Control .
2
Press v or w to select On or Off .
Adjusting 3D Colour Management
You can adjust picture colour quality by selecting from 6
base colour adjustments : Red , Green , Blue , Yellow ,
Magenta and Cyan .
1
From the Advanced Picture Settings menu, press
s or r to select 3D Colour Management , and
then press v or w to select On .
3D Colour Management
2
Press s or r to select Base Colour Adjustment .
3
Press Q , and then press s or r to select the item
you want to adjust.
Base Colour Adjustment
Hue
Red 0
Green
0
Blue 0
0
Yellow
0
Magenta
Cyan 0
4
Press w , and then press s or r to select Hue ,
Saturation or Brightness .
Hue
Red
5
Press s or r to adjust the settings as required.
Note:
If you set 3D Colour Management to Off, Base
Colour Adjustment will not be available.
Resetting Base Colour Adjustment
The reset function returns base colour adjustment to the
factory settings.
1
From the Base Colour Adjustment menu, press
s or r to select Reset .
2
Press Q .
On
Saturation Brightness
0 0
0 0
0 0
0 0
0 0
0 0
Reset
Saturation Brightness
0 0 0