Toshiba 42XV600A Owner's Manual page 20

PC Wide
Use this setting for a PC connected via HDMI or RGB/
PC terminal when receiving PC signal format. This setting
will display the image without picture clipping.
Dot by Dot
"Dot by Dot" is a non-scaling display. Depending on the
input signal format, the picture is displayed with side
panels and/or bars at the top and bottom (i.e. VGA input
source).
Notes:
• Using the special functions to change the size of
the displayed image (e.g. changing the height/
width ratio) for the purpose of public display or
commercial gain may infringe on copyright laws.
• If the aspect ratio of the selected format is different
from the one of the TV transmission or video
programme, it can cause a difference in display.
Change to the correct aspect ratio picture size to
fix this.
• When using a PC connected via HDMI or RGB/PC
terminal, moving image quality may deteriorate.
Using the picture still feature
• Press  to freeze the picture.
Even if an image is frozen on the TV screen, the pictures
are still running on the input source. Audio continues to be
output as well.
To return to a moving picture, press  again.
( Mov i ng )
Note:
If you use this function except for the purpose of
your private viewing and listening, it may infringe
upon copyrights protected by copyright laws.
20
Using the TV's features (General)
Adjusting the Picture Position
Adjustment to the position of the picture may be made to
suit your viewing preferences.
1
2
3
Notes:
• When the picture size is in Wide or 4:3 mode, only
• When the picture size is in Native, PC Wide, PC
Resetting the Picture Position
This function resets your picture position settings to the
factory settings.
1
2
Activating the Picture Mode
( Sti l l)
This TV offers the choice of personalising the picture
style.
AutoView , Dynamic , Standard , Movie , Store ,
Game and PC are preset options and affect many
features/settings within the TV.
Notes:
• Because the AutoView mode automatically adjusts
From the SETUP menu, press s or r to select
Picture Position .
SETUP
Menu Language
Auto Tuning
ATV Manual Tuning
DTV Manual Tuning
DTV Settings
AV Connection
Picture Position
Quick Setup
Press Q , and then press s or r to select the item
you want to adjust.
Picture Position
Horizontal Position
Vertical Position
Press v or w to adjust the settings as desired.
Horizontal Position
the Horizontal Position can be adjusted.
Normal and Dot by Dot mode, this function will not
be available.
From the Picture Position menu, press s or r to
select Reset .
Press Q .
picture settings based on ambient light conditions
and input signal content, the Auto Brightness
Sensor and Expert Mode menus are greyed out
when it is selected.
- analogue only -
English
Germany
Antenna
0
0
Reset
0