Chapter 1 General Precautions; General Precautions; When Installing Or Moving - Toshiba e-studio 2050c Safety Information Manual

GENERAL PRECAUTIONS

1.
General Precautions
 When installing or moving
e-STUDIO2050C/2550C and e-STUDIO2051C/2551C
For the U.S.A. and Canada
Multifunctional Digital Systems require 120 V, 15 A, 50/60 Hz electric power.
For the EU
Multifunctional Digital Systems require 220 to 240 V AC, 10 A, 50/60 Hz electric power.
Except the U.S.A., Canada and the EU
Multifunctional Digital Systems require 220 to 240 V AC, 10 A, 50/60 Hz electric power.
e-STUDIO2555C/3055C/3555C/4555C/5055C and e-STUDIO2555CSE/3055CSE/3555CSE/
4555CSE/5055CSE
For the U.S.A. and Canada
Multifunctional Digital Systems require 120 V, 12 A, 50/60 Hz electric power.
For the EU
Multifunctional Digital Systems require 220 to 240 V AC, 8 A, 50/60 Hz electric power.
Except the U.S.A., Canada and the EU
Multifunctional Digital Systems require 220 to 240 V AC, 8 A, 50/60 Hz electric power.
e-STUDIO5560C/6560C/6570C
For the U.S.A. and Canada
Multifunctional Digital Systems require 115 V, 20 A (or 15 A + 20 A), 50/60 Hz electric power. The power
cables are recommended to be plugged in two separate outlets for stable power supply. If two power
cables are plugged into a single outlet, be sure to use at least a 20 A dedicated outlet.
For the EU
Multifunctional Digital Systems require 220 to 240 V AC, 13 A, 50/60 Hz electric power.
Except the U.S.A., Canada and the EU
Multifunctional Digital Systems require 220 to 240 V AC, 10 A, 50/60 Hz electric power.
 Do not use a power supply with a voltage other than that specified.
Avoid multiple connections in the same outlet. This could cause a fire or give you an electric shock. If
you are considering increasing the number of outlets, contact an electrician.
 Always connect this Multifunctional Digital Systems to an outlet with a ground connection to avoid the
danger of fire or electric shock in case of short-circuiting. Contact your service representative for the
details. Be sure to use a 3-conductor, grounded wall outlet.
In areas, except the U.S. and Canada, where a 2-pin plug is used, the Multifunctional Digital Systems
must be grounded for safety. Never ground it to a gas pipe, a water pipe, or any other object not suitable
for grounding.
General Precautions 17