Installing the battery pack
To install a battery pack, follow the steps below.
The battery pack is a lithium ion (Li-Ion) battery, which can explode if not
properly replaced, used, handled or disposed of. Dispose of the battery as
required by local ordinances or regulations. Use only batteries
recommended by TOSHIBA as replacements.
1. Turn the computer's power off.
2. Disconnect all cables connected to the computer.
3. Hold the battery pack so that the label faces down and the
connectors on the battery face the connectors on the computer.
4. Gently press the battery into the battery bay until the latch clicks into
place.
Satellite 1130 Series
Installing the battery pack
Power and Power-Up Modes
6-13