Printer - Toshiba Satellite 1130 User Manual

Problem
Some CDs run
correctly, but others
do not

Printer

Refer also to the Parallel printer section in Chapter 7, Optional devices,
and to the troubleshooting and other relevant sections in your printer and
software documentation.
Problem
Printer does not
turn on
Computer/printer do
not communicate
Printer error
Satellite 1130 Series
Procedure
The software or hardware configuration may be
causing a problem. Make sure the hardware
configuration match's your software's needs.
Check the disc's documentation.
Check the type of disc you are using. The drive
supports:
CD-DA, CD-ROM, CD-ROM XA (except
ADPCM), CD-I Ready, PhotoCD, CD-Extra
(CD+), CD-text, DVD-Video, DVD-ROM,
Check the region code on the DVD. It must
match that on the DVD-ROM drive. Region
codes are listed in the Drives section in
Chapter 2, The Grand Tour.
If problems persist, contact your dealer.
Procedure
Check that the printer is connected to an electric
outlet. Make sure the outlet is supplying power
by plugging in an appliance.
Make sure the printer is turned on and is online
(ready to use).
Inspect the cable connecting the printer to the
computer for damage. Make sure it is securely
connected.
A parallel printer connects to the parallel port.
Make sure the port is configured correctly.
Make sure your software is configured to
recognise the printer. Check your printer and
software documentation.
Check your printer documentation.
If problems persist, contact your dealer.
Troubleshooting
8-11