Table of Contents
Advertisement
Removing discs
To remove the CD/DVD, follow the steps below and refer to the following
illustration.
Do not press the eject button while the computer is accessing the drive.
Wait for the Optical Media indicator to go out before you open the
drawer. Also, if the CD/DVD is spinning when you open the drawer, wait
for it to stop before you remove it.
1. To pop the drawer partially open, press the eject button. Gently pull
the drawer out until it is fully opened.
When the drawer pops open slightly, wait a moment to make sure the
CD/DVD has stopped spinning before pulling the drawer fully open.
Turn off the power before you use the eject hole. If the CD/DVD is
spinning when you open the drawer, the CD/DVD could fly off the spindle
and cause injury.
2. The CD/DVD extends slightly over the sides of the drawer so you can
grasp it. Hold the CD/DVD gently and lift it out.
3. Push the centre of the drawer to close it. Press gently until it locks into
place.
Satellite 1130 Series
Removing a CD/DVD
Operating Basics
4-7
Advertisement
Table of Contents
