Reset The Timeout - Tektronix phaser 850 Advanced Features And Troubleshooting Manual

Reset the timeout

1.
In the front panel, scroll to Menu; press Select.
2.
Scroll to Printer Configuration; press Select.
3.
Scroll to Default Printer Settings; press Select.
4.
Scroll to 1st Page Preview Timeout; press Select.
5.
To change the timeout (the amount of time the printer pauses before completing the
print job), press the up or down arrows; press Select.
6.
To exit, scroll to Exit and press Select.
Note
You can also control the default timeout for 1st Page Preview through
PhaserLink Printer Management software. For details on PhaserLink Printer
Management software, refer to the PhaserShare Networking Manual on the
printer's CD-ROM or Tektronix web site.
Advanced Features and Troubleshooting Manual
Advanced Printing Features for Phaser 850 Printers
33