Recovery Key Status - IBM XIV User Manual

Completion Codes:
v UNSUPPORTED_HARDWARE
v NO_LIVE_KEYSERVER_GATEWAY_NODE
v CANNOT_READ_FROM_KEY_REPOSITORY
v INSUFFICIENT_RK_ADMIN_THRESHOLD
v ENCRYPTION_KR_WRITE_FAILED
v NO_MASTER_KEYSERVER_DEFINED
v INVALID_RECOVERY_KEY_STATE
v INSUFFICIENT_RK_ADMINS
v CANNOT_GENERATE_KEYS_ON_KEYSERVER_GATEWAY
v KEYSERVER_COMMUNICATION_GENERIC_ERROR

Recovery Key Status

Shows status information regarding recovery keys
This command shows status information regarding recovery keys, specifically:
Before encrypt_enable or in the recovery key rekey process, which user has verified
his recovery key When using the recovery key to unlock the disks, which user has
502
IBM XIV Storage System User Manual
User Category
Technicians
Cannot utilize encryption on unsupported hardware.
Troubleshooting: Contact support to verify encryption status.
There is no live key server gateway node on the system.
Troubleshooting: Please restart the key server gateway node and retry.
Failed reading keys from the key repository.
Troubleshooting: Contact support.
Recovery key creation requires at least two security administrators.
Troubleshooting: Retry the command with at least 2 security administrators
Error writing to the key repository.
Troubleshooting: Contact support
There is no master key server defined on the system.
Troubleshooting: Please define a master key server by invoking encrypt_key
server_update and retry.
Recovery key state is inconsistent with the option provided.
Troubleshooting: Check the recovery key state using encrypt_recovery_key_list.
Number of users must be greater than or equal to the minimal required number.
Troubleshooting: Retry the command with at least the minimum number of
required users
Failed to generate XMK and hashes on key server gateway node.
Troubleshooting: Contact support.
Cannot connect to an active key server.
Troubleshooting: Invoke encrypt_key server_list and event_list for more details.
encrypt_recovery_key_status
Permission
Disallowed