Change Keyserver Properties - IBM XIV User Manual

Change Keyserver Properties

Change a keyserver ip address and/or port
Parameters:
This command is used to update a keyserver's address, port, or certificate.
Example:
Output:
Access Control:
Completion Codes:
v UNSUPPORTED_HARDWARE
v ENCRYPTION_UNKNOWN_KEYSERVER
encrypt_keyserver_update name=Name [ ipv4=Address ] [ ipv6=Address ] [ port=PortNumber ]
[ master=<yes|no> ] [ certificate=PemCertificate ]
Name Type
name String
N/A
certificat
e
master Enumeration
ipv4 N/A
ipv6 N/A
port Integer
xcli -u -c XIV1 encrypt_keyserver_update name=nachos master=yes ipv4=10.0.0.1
ipv6=2001::2 port=1010 certificate=''
Command completed successfully.
User Category
Storage administrator
Storage integration administrator
Application administrator
Security administrator
Read-only users
Technicians
Cannot utilize encryption on unsupported hardware.
Troubleshooting: Contact support to verify encryption status.
Unknown key server name.
Description Mandatory
Name of the Y
keyserver to
update
The public N
certificate of the
keyserver being
changed
Indicates this N
keyserver the
master
The IPv4 address N
The IPv6 address N
Port number for N
communications
Permission
Disallowed
Disallowed
Disallowed
Allowed
Disallowed
Disallowed
Chapter 23. Encryption enablement and support commands
Default
N/A
none
no
none
none
5696
495