Toshiba Portege R100 User Manual page 39

TOSHIBA
Presentation
button
TOSHIBA
Console
button
Touch pad
Touch pad
control
buttons
LCD Sensor
switch
Do not put a magnetic object close to the switch. The computer will
automatically enter Hibernation mode even if the Panel Power On/Off
features is disabled.
Portégé R100
Press this button to change internal display, external
display, simultaneous display, or multi-monitor display.
The default setting is the simultaneous display on LCD
and CRT with resolution of 1024 X 768. When you press
this button twice, the display mode returns to single
display on LCD only. Setting of multi-monitor display in
Windows XP, PC changes its display mode to the multi-
monitor display on LCD and CRT. You can also return to
single display by pressing this button twice.
The setting of TOSHIBA Presentation button can be
changed through the property of TOSHIBA Console.
Display mode is changed to the multi-monitor display
by selecting "Different Image" (Windows XP only) or to
the simultaneous display on internal and external
display by selecting "Same Image".
Press this button to launch an application automatically.
The default is TOSHIBA Console.
A Touch pad located in the center of the palm rest is
used to control the on-screen pointer. Refer to the
Using the Touch pad section in Chapter 4, Operating
Basics.
Control buttons below the Touch pad let you select
menu items or manipulate text and graphics designated
by the on-screen pointer.
This switch senses when the LCD panel is closed or
opened and activates the Panel Power Off/On feature.
When you close the panel the computer enters
Hibernation mode. When you open the panel the
computer starts in Hibernation mode. Use the TOSHIBA
Power Saver Utility to enable or disable this features.
The default is "enabled." Refer to the TOSHIBA Power
Saver Utility and Panel Power Off/On items in Chapter
1, Introduction, for details.
The Grand Tour
2-8