Toshiba Portege R100 User Manual page 30

HW Setup
TOSHIBA Password
Utility
Display Driver for
Windows
Sound driver
TOSHIBA
Accessibility
Hot key utility
TOSHIBA Controls
TOSHIBA Console
ConfigFree
Portégé R100
This program lets you customize your hardware
settings according to the way you work with
your computer and the peripherals you use. To
start the utility, open the Control Panel, click
Printers and Other Hardware and click the
TOSHIBA HW Setup icon.
The TOSHIBA Password Utility provides two
levels of password security: User and
Supervisor.
The display driver enables simultaneous display
on the internal LCD, and on an external
computer monitor. To enable this function, use
the Display Properties dialogue box.
A broad range of audio controls are available
through the ADI sound driver, including Software
Synthesize, Mic Volume and Noise Reduction.
Click Control Panel and click the SoundMAX
icon to change the Mic Noise Reduction setting.
For other sound settings, use the Windows
Device Manager, Multimedia Panel or Volume
Dial.
This utility lets you make the Fn key sticky, that
is, you can press it once, release it, and they
press an "F number" key. The Fn key remains
active until another key is pressed.
This utility lets you display or hide a confirmation
message when you press Fn + F3 or Fn + F4.
Use this utility to customize TOSHIBA Console
button settings.
TOSHIBA Console is a graphical user interface
that provides easy access to help and services.
It is the default function launched by the
TOSHIBA Console button.
ConfigFree is a suite of utilities to allow easy
control of communication device and network
connections. ConfigFree also allows you to find
communication probrems and create profiles for
easy switching between location and
communication networks.
You can boot ConfigFree from the menu bar as
follows.
[Start] – [All Programs] – [TOSHIBA ConfigFree] –
[ConfigFree]
Introduction
1-8