Sharp AL-2060 Operation Manual page 28

INITIAL SETTINGS
To change the order of display of the date, follow the steps below:
1
Press the [MENU] key.
1,2,3,
1,2,3,
SP. FUNC
2
Press the [ ] key (
until "4:USER PROGRAM" appears,
and then press the [OK] key.
Selection
"4:USER PROGRAM"
3
Press the [ ] key (
until "21:DATE&TIME FORMAT"
appears, and then press the [OK] key.
Selection
"21:DATE&TIME FORMAT"
4
Press the [ ] key (
until "2:DATE FORMAT" appears, and
then press the [OK] key.
Selection
"2:DATE FORMAT"
5
Press the [ ] key (
to select the display order.
1,2,3,
1,2,3,
SP. FUNC
This selection does not affect the order of
Note
the date that appears in "2:DATE & TIME
SET" in step 4 on page 22.
The date in this step always appears in the
format "YYYYMMDD".
24
) or [ ] key (
) or [ ] key (
) or [ ] key (
) or [ ] key (
The selections are as
follows:
1:MMDDYYYY
2:DDMMYYYY
3:YYYYMMDD
6
Press the [OK] key.
1,2,3,
1,2,3,
SP. FUNC
7
) Press the [MENU] key.
1,2,3,
1,2,3,
SP. FUNC
)
)
)
Press the [MENU] key to
exit.