Media; Originals Suitable For Faxing; Size And Weight - Sharp AL-2060 Operation Manual

Hide thumbs Also See for AL-2060:

Table of Contents

Chapter 3

CHOOSING SUITABLE MEDIA

Make sure that the originals you want to fax meet specifications and guidelines listed in this section.

The size and weight of originals that you can load in the RSPF depend on whether you load one sheet at a time or

several sheets at once.

When using the RSPF

56 /m

Note

When feeding in a long original, grasp the original at the edges to guide it into the machine.

When using the document glass

When you are using the faxing functions of the machine, your originals are, in effect, being scanned through the

Note

machine. The area of a original that is scanned by the machine while faxing is slightly smaller than the actual

original size. Any text or graphics outside this area will not be scanned.

90.3 /m

140 mm

216 mm

Maximum

1mm ~ 4mm

Scanning length

and width

4 mm or less

One-sided original: 500 mm

Two-sided original: 356 mm

216 mm

364 mm

216 mm

Max. 4.5 mm

(along the other edges in totals)

Table of Contents

Troubleshooting