Wiring Connection; Part List For Installation - Kenwood KMM-BT34 Instruction Manual

KMR-M308BTE
Wiring connection (for
Fuse (10 A)
Microphone input
jack ( 8)
To front speaker (left)
To front speaker (right)
To rear speaker (left)
To rear speaker (right)
Ignition switch
Car fuse box
Car fuse box
Black (Ground wire)
To the metallic body or chassis
of the car
Battery
18
)
Rear/ subwoofer output
White
Light blue/yellow
White/Black
(Steering remote
Gray
control wire)
Gray/Black
Green
Green/Black Blue/White
(Power control wire)
Purple
Purple/Black
Red
Brown
(Ignition wire)
(Mute control wire)
Yellow
(Battery wire)
Blue
(Antenna control
wire)
Antenna terminal
If no connections are made, do not let the wire
come out from the tab.
To the steering wheel remote control
adapter
To the power control terminal when
using the optional power amplifier,
or to the antenna control terminal in
the vehicle.
To connect the Kenwood navigation
system, refer your navigations manual.
(Not used)

Part list for installation

(A) Faceplate
(B) Trim plate
(C) Mounting sleeve
(D) Wiring harness
KMM-BT34
KMM-302BT
(for / )
KMR-M308BTE
(for )
(E) Extraction key