Surround Mode Chart - Harman Kardon AVR1550 Owner's Manual

Operation

Surround Mode Chart

MODE FEATURES
DOLBY DIGITAL Available only with digital input sources encoded with Dolby Digital data. It provides
up to five separate main audio channels and a special dedicated Low Frequency Effects
channel.
DTS Available only with digital input sources encoded with DTS data. Available on special
DVD, LD and audio-only discs, DTS provides up to five separate main audio channels and
a special dedicated low frequency channel.
DOLBY PRO LOGIC II Dolby Pro Logic II is the latest version of Dolby Laboratory's benchmark surround technology that
creates or decodes full range, discrete left, center, right, right surround and left surround channels
from either matrix surround encoded programs and conventional stereo sources. The Dolby
ProLogic II Movie mode is optimized for movie soundtracks that are recorded with matrix
surround, by creating true rear left, center and right signals. The ProLogic II Music mode
should be used with musical selections, that are recorded with matrix surround or with normal
stereo mode, creating discrete rear left and right signals. The ProLogic II Emulation mode creates
compelling five-channel surround from conventional stereo recordings.
DOLBY 3 STEREO Uses the information contained in a surround encoded or two channel stereo program to
create center channel information. In addition, the information that is normally sent to the
rear channel surround speakers is carefully mixed in with the front left and front right
channels for increased realism. Use this mode when you have a center channel speaker
but no surround speakers.
THEATER The THEATER mode creates a sound field that resembles the acoustic feeling
of a standard live performance theater, with stereo and even pure mono sources.
HALL 1 The two Hall modes create sound fields that resemble a small (HALL 1) or
HALL 2 medium sized (HALL 2) concert hall, with stereo and even pure mono sources.
5-Channel Stereo This mode takes advantage of multiple speakers to place a stereo signal at both the front and
back of a room. Ideal for playing music in situations such as a party, it places the same signal
at the front-left and surround-left, and at the front-right and surround-right speakers. The center
channel is fed a summed mono mix of the in-phase material of the left and right channels.
SURROUND This mode turns off all surround processing and presents the pure left and right
OFF (STEREO) channel presentation of two channel stereo programs.
20 OPERATION
DELAY TIME RANGE
Center: 0 ms – 5 ms
Initial Setting – 0 ms
Surround: 0 ms – 15 ms
Initial Setting – 0 ms
Delay time not adjustable
Movie and Emulation:
10 ms - 25 ms,
Initial Setting - 10 ms,
Music:
0 ms - 15 ms,
Initial Setting - 0 ms
No surround channels
Delay time not adjustable
Delay time not adjustable
No delay is available for
this mode
No surround channels