Programming The Wheel And Pedals; Programming Procedure - Thrustmaster FERRARI WIRELESS GT COCKPIT 430 scuderia Edition User Manual

PROGRAMMING THE WHEEL AND PEDALS

Your wheel is fully programmable:
- All the action buttons can be switched between themselves.
- All the action buttons can be programmed onto the pedals or gearshift paddles.
TWO PROGRAMMING MODES
The button and the PRESET
AUTOMATIC (pre-programmed) or MANUAL (programmed by yourself). Simply pressing this button allows you
to switch from one programming mode to another (even during a game).
"AUTOMATIC PRESET" (PRESET
This is the default programming.
For more information, refer to the diagrams in CONFIGURING "AUTOMATIC PRESET"
"MANUAL PRESET" (PRESET
This is your personal programming. The buttons can either be:
- programmed onto the pedals or gearshift paddles
- or switched between each other.
- You can change your programming whenever you want.
- The programming is automatically saved in the wheel (even when it is disconnected or switched off).
- When your "MANUAL PRESET" is blank, it is identical to "AUTOMATIC PRESET".

PROGRAMMING PROCEDURE

Steps
1
2
Press and release the MAPPING button
3
Press and release the button, the gearshift paddle or pedal you
4
Your "MANUAL PRESET" programming is now enabled and updated (with your programming applied).
LED allow you to view the programming type chosen:
- PLAYSTATION® 3 / PC.
BUTTON ON)
Action
Activate "MANUAL PRESET"
by pressing the button.
Press and release the button to programme.
want to assign to this function.
BUTTON OFF)
16/20
LED status
On
On
Flashing
Off
On