Unscrew or screw the by-pass screw
•
until a regular small flame is reached.
For LPG screw completely the by-pass
•
screw.
Reassemble the parts following the same
procedure in reverse.
Check that, when turning the knob quickly
from the maximum position to the minimum
one, the flame does not go out.
Replace the nozzles of the oven burners
Oven burner
To replace the gas oven nozzle, follow this
procedure:
Check the table no.1 for diameter of
•
nozzle;
Remove the oven removable base
•
panel;
Remove the screw on the oven burner
•
rod at the rear of the oven;
Remove the oven burner by pushing it
•
backwards.
Replace the nozzle "C" by means of a
•
No 10 socket spanner;
Reassemble the parts following the same
procedure in reverse.
Grill burner
To replace the gas grill nozzle, follow this
procedure:
Remove the grill burner after removing
•
the fixing screw.
Replace the nozzle by means of a No 10
•
socket spanner;
Refit all parts and test.
24