Changing The Mode Of A Device Key; Resetting A Device Key - One for All 2 User Manual

Changing the Mode of a Device Key

With your ONE FOR ALL 2 Remote it is possible to change the mode of a
device key. This is useful if you want the ONE FOR ALL 2 to operate more
than one of the same device types such as two Televisions or two Video
Recorders for example.
Example: to program a second Television on the VCR key, you need
to change the VCR key into a TV key.
1
2
9 9
2
3
4
The VCR key of the ONE FOR ALL 2 is now ready to be set-up for your
Television. To enter the Set-up code for your second TV, proceed with the
setup procedure on page 6 remembering to use TV codes for the VCR key.

Resetting a Device Key

Example: to reset the VCR key back to its original mode.
1 Hold down the MAGIC key until the red light blinks twice (the red
light will blink once then twice).
2 Press 9 9 2. The red light will blink twice.
3 Press the VCR key (the device mode you want to reset).
4 Now press the VCR key again to confirm and the red light will blink
twice.
Now your VCR key of the ONE FOR ALL 2 is ready to be programmed for
your Video Recorder again. To enter the Set-up code for your Video
Recorder, proceed with the setup procedure on page 6.
WWW.ONEFORALL.COM
Press and hold down the MAGIC key until the red light
blinks twice (the red light will blink once then twice).
Press 9 9 2. The red light will blink twice.
Press the TV key (the device mode you want to duplicate).
Now press the VCR key (the device mode key you want
changed) and the red light will blink twice.
9