Advanced Functions; Sequences; Power Sequence; Sequences Power Sequence - One for All Topline User Manual & Code Book

Advanced Functions

SEQUENCES

POWER SEQUENCE - Turning on your
components with one key.
After you have set up the Topline 5 with your components, you can then set
up a Sequence on the A key which will allow you to turn on all these com-
ponents with the touch of a key. A Sequence can be assigned to any key
EXCEPT: TV, VCR, SAT, CD, AUX, MAGIC, ESC, LITE, ENTER, SHIFT and SCAN.
To program the Power Macro:
1 Press and hold MAGIC until the display screen changes to
MAGIC
[TIMED SEQ].
2 Press the Menu- key twice until the display changes to
[CONFIGURE]. Press ENTER and the display will change to
MENU- MENU-
[TIME SETUP].
3
Press the Menu- key three times until the display
x 3
changes to [KEY SEQ]. Press ENTER and the display will
MENU-
read [SEL SEQKEY] (select sequence key).
4 Press A (to assign the sequence to this key). Now enter
the sequence for all the devices you want to turn "ON".
For example:
AUX + POWER + TV + POWER + SAT + POWER + etc.
until you have entered all devices you want to be
included.
5
While entering the sequence, the display will read [ESC TO
END]. When you have entered the sequence, press ESC to
save. The display will return to [DEVICE and the TIME].
6 To activate the Power Sequence, aim the Topline 5 at your
devices and press A to activate.
Notes:
- During step 4, it is important to enter the sequence in the order you
want your components to turn on. For example, if you would like your
tuner or amplifier to turn on before your TV, you must enter the
sequence in this order.
- If your original remote requires that you press a number key to turn on
your device, you should do this in place of pressing Power during step 4.
17