Your manual is divided into two parts: set-up instructions and device codes. You may need this guide again in the future, so please be sure to keep it. Your ONE FOR ALL needs 2 new “AA/LR6” alkaline batteries. Your ONE FOR ALL can operate a Television. WWW.ONEFORALL.COM...
Installing the Batteries Your ONE FOR ALL needs 2 new “AA/LR6” alkaline batteries. Remove the battery cover from the back of your ONE FOR ALL by pressing down on the tab. Match the batteries to the + and - marks inside the battery case, then insert the batteries.
Page 5
Fastext functions of your television. If on your original remote control these keys are used for Menu navigation, the ONE FOR ALL Fastext keys may operate in the same way. Important note: For a more detailed explanation of Teletext and Fastext, please refer to the manual of your television.
Before you start, please read these instructions carefully Direct code set up To set up the ONE FOR ALL for your television: Find the code for your device in the Code list (page 9 - 17). Codes are listed by brand name.
Search Method If your device does not respond to the ONE FOR ALL after you have tried all the codes listed for your brand, try searching for your code. The Search Method allows you to find the code for your device by scanning through all the codes contained in the memory of the ONE FOR ALL.
A) Try all the codes listed for not operate your your brand. B) Try the search device ? method on page 7. The ONE FOR ALL is not You may be using the wrong performing commands code. Try repeating the Direct properly?