Editing A Recorded Minidisc - Sharp MD-SR75H Operation Manual

Editing a Recorded MiniDisc

To erase tracks one at a time
1
Start playing the track to
be erased, and press the
06 button.
06 06
06 06
2
Press the EDIT button re-
peatedly to select "ERASE".
3
Press the ENTER/SYNC
button.
To cancel the operation, press
the • /:OFF button.
4
Press the ENTER/SYNC
button again.
The track will be erased.
5
To erase other tracks, re-
peat steps 1 - 4.
38
Web-site: www.sharp.co.uk/support
To erase all of the tracks at once
1
Whilst in the stop mode,
press the EDIT button re-
peatedly to select "ALL
ERASE".
2
Press the ENTER/SYNC
button.
To cancel the operation, press
the • /:OFF button.
3
Press the ENTER/SYNC
button again.
All of the tracks will be erased.
Caution:
Once a track has been erased, it can
not be recovered.
Check the track number before eras-
ing it.
Help Line: 0990 274277 (office hours)
To divide a track
1
Start playing the track to
be divided into two. Press
the 06 06 button at the point
06 06
06
where you want to divide
the track.
2
Press the EDIT button re-
peatedly to select "DIVIDE".
3
Press the ENTER/SYNC
button.
To cancel the operation, press
the • /:OFF button.
4
Press the ENTER/SYNC
button again.
The track will be divided into
two tracks, and the unit will
pause at the beginning of the
second of the two new tracks.