Inserting A Minidisc - Sharp MD-SR75H Operation Manual

Inserting a MiniDisc

2
1
4
Check that the erase-protection
tab is in the recordable position.
1
Slide the OPEN lever to release the com-
partment door.
2
Lift it up.
3
Insert a MiniDisc as shown.
4
Close the compartment door.
Notes:
Do not place the MiniDisc under the holder.
3
If any resistance is felt, do not force the MiniDisc into the
unit, as it may cause damage to the unit. If resistance is
felt, remove the MiniDisc and reload it.
The lid can not be opend if "TOC" is displayed refer to
the instruction on page 15.
Web-site: www.sharp.co.uk/support Help Line: 0990 274277 (office hours)
11