Editing A Recorded Minidisc - Sharp MD-MT90W Operation Manual

Editing a Recorded MiniDisc

„ To erase tracks one at a time
1
Start playing the track to be erased, and press
the PLAY/PAUSE button.
2
Press the EDIT button repeatedly to select
"ERASE".
3
Press the ENTER/SYNC button.
To cancel the operation, press the /:OFF button.
4
Press the ENTER/SYNC button again.
The track will be erased.
5
To erase other tracks, repeat steps 1 - 4.
E-35
ENGLISH
„ To erase all of the tracks at once
1
Whilst in the stop mode, press the EDIT button
repeatedly to select "ALL ERASE".
2
Press the ENTER/SYNC button.
To cancel the operation, press the /:OFF button.
3
Press the ENTER/SYNC button again.
All of the tracks will be erased.
Caution:
Once a track has been erased, it cannot be recov-
ered. Check the track number before erasing it.
00/12/27 E_90EX_5.FM