Startup Guide
This guide shows you how to set the Remote Commander to operate your components.
First, find the four-digit component code number for your component, referring to the supplied
"Component code numbers."
If you have the code number
Example: To set up a TV of the code
number "8011"
1
Set the Remote Commander for code
input mode.
Press SET and MENU.
2
Press the desired Component Select
button.
3
Enter the code number.
4
Finish setting.
Press ENT.
For more details, see page
8
.
If you cannot find the code
number
You can search for the component code
available for your component.
1
Set the Remote Commander for code
input mode.
Press SET and MENU.
2
Press the desired Component Select
button.
3
Transmit code number signals in turn.
Press PROG + or PROG –, and then 1.
Repeat until your component reacts.
4
Finish setting.
Press ENT.
For more details, see page
10
.
3
Continued