Startup Guide - Sony RM-VL610A Operating Instructions (RM-VL610A Remote Commander®) Operating Instructions Manual

Startup Guide

This guide shows you how to set the Remote Commander to operate
your components.
First, find the four-digit component code number for your
component, referring to the supplied "Component code numbers."
If you have the code
number
Example: To set up a CD of
the code number "5001"
1
Set the Remote
Commander for code input
mode.
Press SET and MENU.
2
Press the desired
Component Select button.
3
Enter the code number.
4
Finish setting.
Press ENT.
For more details, see page
4 4
If you cannot find the
code number
You can search for the
component code available for
your component.
1
Set the Remote
Commander for code
input mode.
Press SET and MENU.
2
Press the desired
Component Select button.
3
Transmit code number
signals in turn.
Press CH + or CH –, and then
POWER. Repeat until your
component reacts.
4
Finish setting.
10
. For more details, see page
Press ENT.
13
.