How To Add Fluid - Oldsmobile AURORA 2001 Owner's Manual

2. Push it back in all the way, wait three seconds and
then pull it back out again.
3.5L V6 Engine
4.0L V8 Engine
3. Check both sides of the dipstick, and read the lower level.
The fluid level must be in the cross
4. If the fluid level is in the acceptable range, push the
dipstick back in all the way.

How to Add Fluid

Refer to the Maintenance Schedule to determine what
kind of transaxle fluid to use. See "Recommended
Fluids and Lubricants" in the Index.
If the fluid level is low, add only enough of the proper fluid to
bring the level into the cross
1. Pull out the dipstick.
2. Using a long
-
hatched area.
3. After adding fluid, recheck the fluid level as
4. When the correct fluid level is obtained, push the
-
-
neck funnel, add enough fluid at the
dipstick hole to bring it to the proper level.
It doesn't take much fluid, generally less than
one pint (0.5 L). Don't overfill.
NOTICE:
We recommend you use only fluid labeled
R
-
DEXRON III, because fluid with that label is
made especially for your automatic transaxle.
Damage caused by fluid other than DEXRON
is not covered by your new vehicle warranty.
described under "How to Check."
dipstick back in all the way.
hatched area on the dipstick.
R
-
III
6-25