Oldsmobile AURORA 2001 Owner's Manual page 154

The DIC is used to program the personal choices of
two drivers. The drivers are recognized as DRIVER 1
and DRIVER 2. You will let the DIC and the vehicle
know which driver you are by using your remote lock
control transmitter or by pressing the appropriate
memory seat control button located on the driver's door
or choosing the driver with the DIC. Each remote lock
control transmitter was pre
DRIVER 1 or DRIVER 2. The personalization features
may be programmed differently for each driver.
When you press the unlock symbol on the transmitter,
the DIC will automatically change driver numbers and the
vehicle will recall the personal choice settings that were
last made to correspond to your transmitter, including
your radio and comfort control settings. See "Comfort
Controls, Personalization" in the Index.
If you unlock the vehicle using your door key instead
of your transmitter, the personal choice settings will
correspond to the previous driver of the vehicle as
identified by a transmitter, a memory seat control or
through the DIC. If this happens and you were not
the last driver of the vehicle, press your correct driver
number on the memory seat controls, press the
unlock symbol on your transmitter or select the
personalization programming mode and choose the
correct driver number.
2-84
-
programmed to belong to
After you have the correct driver number on the display
use the SELECT down arrow button to scroll through
the following messages and feature options:
D
DOORS LOCK IN GEAR
D
-
DOORS UNLOCK YES/NO
D
ALL DOORS IN PARK
D
ALL DOORS AT KEY OFF
D
DRIVERS DOOR IN PARK
D
DRIVERS DOOR KEY OFF
D
PASS WINDOW LOCKOUT
D
KEY FOB FLASH LIGHTS
D
KEY FOB CHIRP HORN
D
DELAY LOCK OF DOORS
D
PERIMETER LIGHTS
D
EXT LIGHT TIMEOUT
D
DISPLAY DRIVER ID
D
KEY FOB MEMORY SEAT
D
DRIVING POSITION
D
-
EXIT POSITION YES
D
TILT MIRROR REVERSE
-
YES/NO
-
YES/NO
-
YES/NO
-
YES/NO
-
YES/NO
-
YES/NO
-
YES/NO
-
YES/NO
-
YES/NO
-
YES/NO
-
25
-
YES/NO
-
YES/NO
-
YES
-
YES/NO