Oldsmobile AURORA 2003 Owner's Manual

Oldsmobile AURORA 2003 Owner's Manual

Hide thumbs Also See for AURORA 2003:
Table of Contents

Advertisement

Quick Links

Advertisement

Table of Contents
loading

Summary of Contents for Oldsmobile AURORA 2003

  • Page 2: Table Of Contents

    The 2003 Oldsmobile Aurora Owner Manual ........Driving Your Vehicle Seats and Restraint Systems ................Front Seats ..4-2 Your Driving. the Road. and Your Vehicle Safety Belts ..........4 -8 Towing 4-33 ..................Child Restraints 1-28 Service and Appearance Care ......
  • Page 3 Canada, substitute the name “General Motors of A good place to look for what you need is the Index in Canada Limited” for Oldsmobile Division whenever it back of the manual. It’s an alphabetical list of what’s appears in this manual.
  • Page 4 Safety Warnings and Symbols You will also find a circle with a slash through it in this book. This safety You will find a number of safety cautions in this book. symbol means “Don’t,” We use a box and the word CAUTION to tell you about “Don’t do this”...
  • Page 5 Vehicle Damage Warnings Vehicle Symbols Your vehicle may be equipped with components and Also, in this book you will find these notices: labels that use symbols instead of text. Symbols, used Notice: These mean there is something that could on your vehicle, are shown along with the text damage your vehicle.
  • Page 6 These are some examples vehicle symbols you may find on your vehicle: *&: LATCH BOTH LAP AND CAUTION l . f J SHOULDER BELTS TO ENGINE POSSIBLE LIGHTING PROTECT OCCUPANT COOLANT MASTER SWITCH INJURY ACCESS DO NOT TWIST SAFETY TEMP BELT WHEN ATTACHING PROTECT TURN...
  • Page 7 NOTES...
  • Page 8: Seats And Restraint Systems

    Section 1 Seats and Restraint Systems Front Seats ..........Where to Put the Restraint ......1-37 Manual Passenger Seat ..................Top Strap 1.38 ......Power Seats ..........1 . 2 Top Strap Anchor Location 1-39 Manual Lumbar ..........1 . 3 Lower Anchorages and Top Tethers for Power Lumbar ..........
  • Page 9: Front Seats

    Power Seats Front Seats Manual Passenger Seat You can lose control of the vehicle if you try to adjust a manual driver’s seat while the vehicle is moving. The sudden movement could startle and confuse you, or make you push a pedal when you don’t want to.
  • Page 10 To adjust the power seats, do the following: Manual Lumbar Horizontal Control: Raise or lower the front of the seat cushion by pressing the forward edge of the control up or down. Raise or lower the rear of the seat cushion by pressing the rear edge of the control up or down.
  • Page 11 Power Lumbar Keep in mind that as your seating position changes, as it may during long trips, so should the position of your lumbar support. Adjust the seat as needed. If your vehicle has this If you have the independent front cushion moved down feature, the power lumbar control is located on as far as it will go, you may feel the lumbar support...
  • Page 12 Heated Seats Reclining Seatbacks If your vehicle has this If your vehicle has a power option, the heated seat recliner, the vertical control described previously in switch is located next this section reclines to the console shifter. the front seatbacks. Push the ON part of the switch once for a HI setting If your vehicle has the manual recliner, lift the lever on twice for a LO setting.
  • Page 13 Sitting in a reclined position when your vehicle is in motion can be dangerous. Even if you buckle up, your safety belts can’t do their job when you’re reclined like this. The shoulder belt can’t do its job. In a crash, you could go into it, receiving neck or other injuries.
  • Page 14 Head Restraints Adjust your head restraint so that the top of the restraint is closest to the top of your head. This position reduces the chance of a neck injury in a crash. 1 -7...
  • Page 15: Safety Belts

    Safety Belts Safety Belts: They Are for Everyone _ _ is ext nely dangerous to ride in a cargo This part of the manual tells you how to use safety area, inside or outside of a vehicle. In a belts properly. It also tells you some things you should collision, people riding in these areas are more not do with safety belts.
  • Page 16 Your vehicle has a light Why Safety Belts Work that comes on as a When you ride in or on anything, you go as fast as reminder to buckle up. See it goes. Safety Belt Reminder Light on page 3-33. In most states and in all Canadian provinces, the law says to wear safety belts.
  • Page 19 Questions and Answers About Safety Belts Won’t I be trapped in the vehicle after an accident if I’m wearing a safety belt? could whether you’re wearing a safety belt or not. But you can unbuckle a safety belt, even if you’re upside down. And your chance of being conscious during and after an accident, so you can unbuckle and get out, is much greater if you are belted.
  • Page 20 How to Wear Safety Belts Properly If my vehicle has air bags, why should I have to wear safety belts? This part is only for people of adult size. Air bags are in many vehicles today and will be in Be aware that there are special things to know about most of them in the future.
  • Page 21 Driver Position This part describes the driver’s restraint system. Lap-Shoulder Belt The driver has a lap-shoulder belt. Here’s how to wear it properly. 1. Close and lock the door. 2. Adjust the seat so you can sit up straight. To see how, see “Seats”...
  • Page 22 4. Push the latch plate into the buckle until it clicks. The lap part of the belt should be worn low and snug on the hips, just touching the thighs. In a crash, this Puli up on the latch plate to make sure it is applies force to the strong pelvic bones.
  • Page 23 What's wrong with this? "N: You can be seriously hurt if your shoulder belt too loose. In a crash, you would move forward too much, which could increase injury. The shoulder belt should fit against your body. The shoulder belt is too loose. It won't give nearly as much protection this way.
  • Page 24 What's wrong with this? You can be serious11 ]jured if your belt is buckled in the wrong place like this. In a crash, the belt would go up over your abdomen. The belt forces would be there, not at the pelvic bones.
  • Page 25 What’s wrong with this? You can be seriou injured if you wear the shoulder belt under your arm. In a crash, your body would move too far forward, which would increase the chance of head and neck injury. Also, the belt would apply too much force to the ribs, which aren’t as strong as shoulder bones.
  • Page 26 What’s wrong with this? You can be s,..ously injured by a twisted belt. In a crash, you wouldn’t have the full width of the belt to spread impact forces. If a belt is twisted, make straight so it can work properly, or ask your dealer to fix it.
  • Page 27 Safety Belt Use During Pregnancy Safety belts work for everyone, including pregnant women. Like all occupants, they are more likely to be seriously injured if they don’t wear safety belts. To unlatch the belt, just push the button on the buckle. The belt should go back out of the way.
  • Page 28 The best way to protect the fetus is to protect the Rear Seat Passengers mother. When a safety belt is worn properly, it’s more likely that the fetus won’t be hurt in a crash. For It’s very important for rear seat passengers to buckle pregnant women, as for anyone, the key to making up! Accident statistics show that unbelted people in the safety belts effective is wearing them properly.
  • Page 29 Lap-Shoulder Belt 1. Pick up the latch plate and pull the belt across you. Don’t let it get twisted. All rear seating positions have lap-shoulder belts. Here’s The shoulder belt may lock if you pull the belt how to wear one properly. across you very quickly.
  • Page 31 You can be seriously hurt if your shoulder belt is too loose. In a crash, you would move forward too much, which could increase injury. The shoulder belt should fit against your body. The lap part of the belt should be worn low and snug on the hips, just touching the thighs.
  • Page 32 Rear Safety Belt Comfort Guides for Children and Small Adults Your vehicle may have this feature already. If it doesn’t, you can get it from any GM dealer. Rear shoulder belt comfort guides provide added safety belt comfort for older children who have outgrown booster seats and for small adults.
  • Page 33 3. Be sure that the belt is not twisted and it lies flat. 2. Slide the guide under and past the belt. The elastic The elastic cord must be under the belt and the cord must be under the belt. Then, place the guide over the belt, and insert the two edges of the guide on top.
  • Page 34 Safety Belt Extender If the vehicle’s safety belt will fasten around you, you should use it. But if a safety belt isn’t long enough to fasten, your dealer will order you an extender. It’s free. When you go in to order it, take the heaviest coat you will wear, so the extender will be long enough for you.
  • Page 35: Child Restraints

    Child Restraints What is the proper way to wear safety belts? If possible, an older child should wear a Older Children lap-shoulder belt and get the additional restraint a shoulder belt can provide. The shoulder belt should not cross the face or neck. The lap belt should fit snugly below the hips, just touching the top of the thighs.
  • Page 36 Never do this. Here two children are wearing the same belt. The belt can’t properly spread the impact forces. In a crash, the two children can be crushed together and seriously injured. A belt must be used by only one person at a time. What if a child is wearing a lap-shoulder belt, but the child is so small that the shoulder belt is very close to the child’s face or neck?
  • Page 37 Never do this. Here a child is sitting in a seat that has a lap-shoulder belt, but the shoulder part is behind the child. If the child wears the belt in this way, in a crash the child might slide under the belt.
  • Page 38 Every time infants and young children ride in vehicles, they should have the protection provided by appropriate restraints. Young children should not use the vehicle’s adult safety belts alone, unless there is no other choice. People should never hold a baby in their arms Instead, they need to use a child restraint.
  • Page 39 Children who are up against, or very close to, any air bag when it inflates can be seriously injured killed. Air bags plus lap-shoulder belts offer outstanding protection for adults and older children, but not for young children and infants. Neither the vehicle’s safety belt system nor its air bag system is designed for them.
  • Page 40 For most basic types of child restraints, there are many different models available. When purchasing a child restraint, be sure it is designed to be used in a motor vehicle. If it is, the restraint will have a The body structure of a young child is quite label saying that it meets federal motor vehicle unlike that of an adult or older child, for whom safety standards.
  • Page 41 Child Restraint Systems A rear-facing infant seat (B) provides restraint with the seating surface against the back of the infant. The An infant car bed (A), a special bed made for use in a harness system holds the infant in place and, in a crash, motor vehicle, is an infant restraint system designed acts to keep the infant positioned in the restraint.
  • Page 42 A forward-facing child seat (C-E) provides restraint for A booster seat (F-G) is a child restraint designed to improve the fit of the vehicle’s safety belt system. Some the child’s body with the harness and also sometimes with surfaces such as T-shaped or shelf-like shields. booster seats have a shoulder belt positioner, and ^..^ ”.-:-+...
  • Page 43 When choosing a child restraint, be sure the child How do child restraints work? restraint is designed to be used in a vehicle. If it is, it will have a label saying that it meets federal motor A child restraint system is any device designed for vehicle safety standards.
  • Page 44 Where to Put the Restraint Accident statistics show that children are safer if they are restrained in the rear rather than the front seat. General Motors, therefore, recommends that child A child in a rear-facing -..ild restraint can be restraints be secured in a rear seat, including an infant seriously injured or killed if the right front riding in a rear-facing infant seat, a child riding in a passenger’s air bag inflates.
  • Page 45 Top Strap Some child restraints have a top strap, or “top tether”. It can help restrain the child restraint during a collision. For it to work, a top strap must be properly anchored to the vehicle. Some top strap-equipped child restraints are designed for use with or without the top strap being anchored.
  • Page 46 Once you have the top strap anchored, you’ll be ready to secure the child restraint itself. Tighten the top strap when and as the child restraint manufacturer’s instructions say. Top Strap Anchor Location Your vehicle has top strap anchors already installed for the rear seating positions.
  • Page 47 Lower Anchorages and Top Tethers In order to use the system, you need either a forward-facing child restraint that has attaching for Children (LATCH System) points (B) at its base and a top tether anchor (C), or a rear-facing child restraint that has attaching points (B), as shown here.
  • Page 48 If a LATCHty child restraint isn’t attached to its anchorage- points, the restraint won’t be able to protect a child sitting there. In a crash, the child could be seriously injured or killed. Make sure that a LATCH-type child restraint is properly installed using the anchorage points, or use the vehicle’s safety belts to secure the restraint.
  • Page 49 Securing a Child Restraint Designed Securing a Child Restraint in a Rear Seat Position for the LATCH System 1 . Find the anchors for the seating position you want to use, where the bottom of the seatback meets the back of the seat cushion. 2.
  • Page 51 To remove the child restraint, just unbuckle the vehicle’s safety belt and let it go back all the way. The safety belt will move freely again and be ready to work for an adult or larger child passenger. Securing a Child Restraint in the Right Front Seat Position To tighten the belt, pull up on the shoulder belt while you push down...
  • Page 52 Your vehicle has a right front passenger air bag. 2. Put the restraint on the seat. Never put a rear facing child restraint in this seat. 3. Pick up the latch plate, and run the lap and shoulder Here’s why: portions of the vehicle’s safety belt through or around the restraint.
  • Page 53 6. To tighten the belt, feed the lap belt back into the 5. Pull the rest of the lap belt all the way out of the retractor while you push down on the child restraint. retractor to set the lock. You may find it helpful to use your knee to push down on the child restraint as you tighten the belt.
  • Page 54: Air Bag Systems

    Air Bag Systems This part explains the frontal and side impact air bag systems. Air bags are designe ,o work with safety belts Your vehicle has four air bags a frontal air bag for the but don’t replace them. driver, another frontal air bag for the right front Frontal air bags for the driver and right front passenger, a side impact air bag for the driver, and passenger are designed to deploy only in...
  • Page 55 Air bags plus lap-shoulder belts offer the best Bot rontal and l e impact bags inf protection for adults, but not for young with great force, faster than the blink of an children and infants. Neither the vehicle’s eye. If you’re too close to an inflating air bag, safety belt system nor its air bag system is as you would be if you were leaning forward, designed for them.
  • Page 56 Where Are the Air Bags? instrument panel on the passenger’s side. The driver’s frontal air bag is in the middle of the The driver’s side impact air bag is in the side of the ctnnrinry r r r h n n l ,L,-,.
  • Page 57 If something is between an occupant and an air bag, the bag might not inflate properly or it might force the object into that person causing severe injury or even death. The path of an inflating air bag must be kept clear. Don’t put anything between an occupant and an air bag, and don’t attach or put anything on the steering wheel hub or on or near any other air...
  • Page 58 When Should an Air Bag Inflate? The side impact air bags are designed to inflate in moderate to severe side crashes. A side impact air bag The driver’s and right front passenger’s frontal air bags will inflate if the crash severity is above the system’s designed “threshold level”.
  • Page 59 those air bags. Air bags should never be regarded as What Makes an Air Bag Inflate? anything more than a supplement to safety belts, In an impact of sufficient severity, the air bag sensing and then only in moderate to severe frontal or system detects that the vehicle is in a crash.
  • Page 60 Air bags are designed to inflate only once. After an air bag inflates, you’ll need some new parts for your air bag system. If you don’t get them, the air bag system won’t be there to help protect you When an air bag inflates, there is dust in the in another crash.
  • Page 61 Let only qualified technicians work on your air bag systems. Improper service can mean that an air bag system won’t work properly. See your dealer for service. or up to y is seco s after tl lition Notice: If you damage the covering for the driver’s turned off and the battery is disconnected, an or the right front passenger’s air bag, or the air air bag can still inflate during improper...
  • Page 62: Restraint System Check

    Restraint System Check Torn or frayed safety belts may not protect you in a crash. They can rip apart under impact forces. If a belt torn or frayed, get a new one right away. Checking Your Restraint Systems Also look for any opened or broken air bag covers, and have them repaired or replaced.
  • Page 63 Replacing Restraint System Parts If you’ve had a crash, do you need new belts or LATCH system parts? After a -ash After a very minor collision, nothing may be necessary. But if the belts were stretched, as they would be if worn during a more severe crash, then you need new parts.
  • Page 64: Features And Controls

    Section Features and Controls ................Keys Starting and Operating Your Vehicle 2.23 ......Remote Keyless Entry System 2. 5 New Vehicle Break-In ........2.23 ... Remote Keyless Entry System Operation 2. 6 .......... Ignition Positions 2-23 ..........Doors and Locks 2.10 Starting Your Engine ........
  • Page 65 Features and Controls Section 2 ... Assist Handles 2.45 Onstar@ System ..2.39 ..Floor Mats ..2.46 ....HomeLink@ Transmitter ......2.41 Rear Storage Area ..2.46 ......... 2.41 HomeLink@ Transmitter Convenience Net ..2.46 ..2.42 Programming the HomeLink Transmitter ..
  • Page 66: Keys

    Keys Leaving children in a vehicle with the ignition key is dangerous for many reasons. A child or others could be badly injured even killed. They could operate the power windows or other controls or even make the vehicle move. Don’t leave the keys in a vehicle with children.
  • Page 67 The master key works in Your vehicle has the PASS-Key@ Ill vehicle theft all of the lock cylinders system. Both the master and VALET key have a (driver’s door, trunk, transponder in the key head that matches a decoder in ignition and glove box).
  • Page 68 Remote Keyless Entry System At times you may notice a decrease in range. This is normal for any remote keyless entry system. If the transmitter does not work or if you have to stand closer Your keyless entry system operates on a radio to your vehicle for the transmitter to work, try this: frequency subject to Federal Communications Commission (FCC) Rules and with Industry Canada.
  • Page 69 & Remote Keyless Entry System (Unlock): The driver’s door will unlock and the Operation exterior lights will flash twice when this button is With this feature, you can lock and unlock your doors or pressed. unlock your trunk from about 3 feet (1 m) up to 30 feet (9 m) away using the remote keyless entry transmitter supplied with your vehicle.
  • Page 70 Personalization Features Pressing the unlock button will also illuminate the interior lamps. See “Entry Lighting’’ under Interior Lamps The following list of features available on your vehicle on page 3- 17. can be programmed to the driver’s preference for (Lock): All doors will lock, the exterior lamps will each transmitter.
  • Page 71 Matching Transmitter(s) to Your Security Feedback Vehicle This feature provides feedback to the driver when the vehicle receives a command from the remote keyless Each remote keyless entry transmitter is coded to entry transmitter and all doors are closed. prevent another transmitter from unlocking your vehicle. If a transmitter is lost or stolen, a replacement can You must program this feature through the Driver be purchased through your dealer.
  • Page 72 Battery Replacement To replace the battery, do the following: 1. Insert a coin, or similar object, into the notch near Under normal use, the battery in your remote keyless the key ring. Turn it counterclockwise to separate entry transmitter should last about four years. the two halves of the transmitter.
  • Page 73: Doors And Locks

    Doors and Locks There are several ways to lock and unlock your vehicle. From the outside, use your key or remote keyless entry transmitter. Door Locks Unlocked doors can be dangerous. Passengers especially children easily open the doors and fall out of a moving vehicle.
  • Page 74 Central Door Unlocking System Door Ajar Reminder If a door is not fully closed when the transaxle is in If the key is held in the outside key cylinder unlock gear, a chime will sound and the DIC will display one of position for more than two seconds, all doors will unlock.
  • Page 75 You can also program this feature to be turned off. Programmable Automatic Door Then you will not have automatic door lock or unlock. Locks This feature will function when you close the doors and This is a personalization feature that programs your turn on the ignition.
  • Page 76 Rear Door Security Locks To open a rear door when the security lock is on, do the following: 1. Unlock the door. Your vehicle is equipped with rear door security 2. Open the door from the outside. locks that prevent If you don’t cancel the security lock feature, adults or passengers from opening older children who ride in the rear seat won’t be able to...
  • Page 77 Trunk Lockout Protection The power door locks will not work if the key is in the ignition and any door is open. You can override this feature by holding the driver’s power door lock switch for more than three seconds. It can be dangerous to drive with the trunk lid open because carbon monoxide (CO) gas can Leaving Your Vehicle...
  • Page 78 Trunk Release Lockout Trunk Lock Release To unlock the trunk from the outside, insert the master The trunk release lockout key and turn it. switch in the glove box allows you to secure items Remote Trunk Release in the trunk, and disable the fuel door release Press the trunk release and the HomeLink@...
  • Page 79 Emergency Trunk Release Handle Notice: The emergency trunk release handle is not designed to be used to tie down the trunk lid or as an anchor point when securing items in the trunk. Improper use of the emergency trunk release handle could damage it.
  • Page 80: Windows

    Windows Leaving children in a vehicle with the windows closed is dangerous. A child can be overcome by the extreme heat and can suffer permanent injuries or even death from heat stroke. Never leave a child alone in a vehicle, especially with the windows closed in warm or hot weather.
  • Page 81 To stop the window while it is lowering in the express Power Windows mode, press the switch again, then release. To raise the window, hold the switch forward. Window Lock Out Press the LOCK button on the driver’s door armrest to disable all passenger window controls.
  • Page 82: Theft-Deterrent Systems

    Theft-Deterrent Systems This light reminds you to activate the theft-deterrent system. To activate it do the following: Vehicle theft is big business, especially in some cities. Open the door. Although your vehicle has a number of theft-deterrent features, we know that nothing we put on it can make it Lock the door with the power door lock switch or impossible to steal.
  • Page 83 Testing the Alarm Remember, the theft-deterrent system won’t activate if you lock the doors with a key or manual door lock. The alarm can be tested by following these steps: It only activates if you use the power door lock switch or remote keyless entry transmitter.
  • Page 84 PASS-Key@ 111 Operation PASS-Key@ 111 Your PASS-Key@ Ill system operates on a radio Your vehicle is equipped frequency subject to Federal Communications with the PASS-Key@ Ill Commission (FCC) Rules and with Industry Canada. (Personalized Automotive Security System) This device complies with Part 15 of the FCC Rules. theft-deterrent system.
  • Page 85 To program the new key, do the following: When trying to start the vehicle, if the engine does not start and the SECURITY light comes on, the key 1. Verify that the new key has PK3@ stamped on it. may have a damaged transponder. Turn the ignition off and try again.
  • Page 86: Starting And Operating Your Vehicle

    Starting and Operating Your Ignition Positions Vehicle With the ignition key in the ignition switch, you can turn the switch to four New Vehicle Break-In different positions. Notice: Your vehicle doesn’t need an elaborate “break-in.” But it will perform better in the long run if you follow these guidelines: Don’t drive at any one speed fast or...
  • Page 87 ACC (Accessory): This position lets you use your Starting Your Engine electrical accessories such as power windows, power sunroof (option), radio and the windshield wipers. Move your shift lever to PARK (P) or NEUTRAL (N). Your engine won’t start in any other position that’s a ON: This is the position the switch returns to after you safety feature.
  • Page 88 To Use the Engine Coolant Heater 3. If your engine still won’t start (or starts but then stops), it could be flooded with too much gasoline. 1. Turn off the engine. Try pushing your accelerator pedal all the way to the floor and holding it there as you hold the key in 2.
  • Page 89 How long should you keep the coolant heater plugged in? The answer depends on the outside temperature, the kind of oil you have, and some other things. Instead of trying to list everything here, we ask that you contact js dangerous to get of your veh f the your dealer in the area where you’ll be parking your...
  • Page 90 Ensure the shift lever is fully in PARK (P) before starting the engine. Your vehicle has an automatic transaxle shift lock control system. You have to fully apply your regular brakes before you can shift from PARK (P) when the ignition key is in ON. Shifting into a Glgde gear while engllie is “racing”...
  • Page 91 THIRD (3): This position is also used for normal driving, FIRST (1): This position gives you even more power however, offers more power and lower fuel economy but lower fuel economy than SECOND (2). You can use (a). it on very steep hills, or in deep snow or mud. If the than AUTOMATIC OVERDRIVE Here are shift lever is put in FIRST (I), the transaxle won’t shift...
  • Page 92 Parking Brake To release the parking brake, hold the regular brake pedal down with your right foot and push the parking brake pedal with your left foot. When you lift your Your vehicle has a PUSH left foot, the parking brake pedal will follow it to the TO RELEASE parking release position.
  • Page 93 It can be dangerous to get out of your vehicle if the shift lever is not fully in PARK with the parking brake firmly set. Your vehicle can roll. If you have left the engine running, the vehicle can move suddenly. You or others could be injured.
  • Page 94 Leaving Your Vehicle With the Engine Torque Lock Running If you are parking on a hill and you don’t shift your transaxle into PARK (P) properly, the weight of the vehicle may put too much force on the parking pawl in the transaxle.
  • Page 95 Parking Over Things That Burn Shifting Out of Park (P) Your vehicle has an automatic transaxle shift lock control system. You have to fully apply your regular brake before you can shift from PARK (P) when the ignition is in ON. See Automatic Transaxle Operation on page 2-26.
  • Page 96 Engine Exhaust T..,,Igs that can burn could L d c h hot e x h , , s t parts under your vehicle and ignite. Don’t park Engine exhaust car. --jll. It contains the gas over papers, leaves, dry grass or other things carbon monoxide (CO), which you can’t see or that can burn.
  • Page 97 Running Your Engine While You Are Parked It’s better not to park with the engine running. But if you It can be dangerous to get out of your vehicle ever have here are some things to know. if the shift lever is not fully in PARK (P) with the parking brake firmly set.
  • Page 98 Mirrors Compass Operation COMPASS: Press this button once to turn the compass Automatic Dimming Rearview Mirror on or off. with Compass (On/Off): For mirrors equipped with Onstar@ controls, press this button once to turn the compass on Your vehicle may have an automatic dimming rearview off.
  • Page 99 Compass Variance The mirror is set in zone eight upon leaving the factory. will be necessary to adjust the compass to compensate for compass variance if you live outside zone eight. Under certain circumstances, as during a long distance cross-country trip, it will be necessary to adjust for compass variance.
  • Page 100 Outside Power Mirrors control pad is accidentally bumped while driving. Adjust each outside mirror so that you can see a little of your vehicle and the area behind your vehicle. If your vehicle is equipped with the memory function, the mirrors and driver’s seat position can be stored into memory.
  • Page 101 Outside Heated Mirrors Outside Convex Mirror Your passenger’s side mirror is convex. A convex When you operate the rear window defogger, the mirror’s surface is curved so you can see more from the heated driver’s and passenger’s outside rearview mirrors driver’s seat.
  • Page 102: Onstar@ System

    Onstar@’ System Onstar@ Services OnStap provides a number of service plans to closely meet your needs. Some of the services currently provided by Onstar@ are: Automatic Notification of Air Bag Deployment Emergency Services Roadside Assistance Stolen Vehicle Tracking AccidentAssist Remote Door Unlock Onstar@ uses global positioning system (GPS) satellite Remote Diagnostics technology, wireless communications, and state of...
  • Page 103 Onstar@ Personal Calling Onstar@ Virtual Advisor With Onstar@ Personal Calling, you have a safer way to With Onstar@ Virtual Advisor you can listen to your stay connected while driving. It’s a hands-free wireless favorite news, entertainment and information topics, phone that’s integrated into your vehicle. You can place such as traffic and weather reports, stock quotes calls nationwide using voice-activated dialing with no and sports scores.
  • Page 104: Homelink@ Transmitter

    HomeLink@ Transmitter (2) this device must accept any interference received, including interference that may cause undesired operation. This device complies with RSS-210 of Industry Canada. Operation is subject to the following two conditions: (1) this device may not cause interference, and (2) this device must accept any interference, including interference that may cause undesired operation of the device.
  • Page 105: Programming The Homelink Transmitter

    buttons for longer than 30 seconds and do not Programming the HomeLink@ repeat this step to program a second and/or third Transmitter transmitter to the remaining two HomeLink@ buttons. 2. Position the end of your hand-held transmitter about Do not use the HomeLink@ Transmitter with any garage 1 to 3 inches (3 to 8 cm) away from the HomeLink@ door opener that does not have the “stop and reverse’’...
  • Page 106 If the indicator light blinks rapidly for two seconds Gate Operator and Canadian and then turns to a constant light, continue with Programming Steps 6 through 8 following to complete the programming of a rolling-code equipped device Canadian radio-frequency laws require transmitter (most commonly, a garage door opener).
  • Page 107 Using HorneLink@ Reprogramming a Single HomeLink@ Button Press and hold the appropriate HomeLink@ button for at least half of a second. The indicator light will come To program a device to HomeLink@ using HomeLink@ on while the signal is being transmitted. button previously trained, follow these steps: Erasing HorneLink@ Buttons 1.
  • Page 108: Storage Areas

    Storage Areas In front of the storage area is a cupholder. Press and release the cupholder cover to open. Do not try to pull it out. Press the cupholder back to its recessed position Glove Box when not in use. Use the master key to lock and unlock the glove box.
  • Page 109: Floor Mats

    Floor Mats Convenience Your vehicle is equipped with floor mats. The driver’s Your vehicle may have a convenience net. You’ll see it side floor mat is held in place by a locator hook. just inside the back wall of the trunk. To remove the driver’s side floor mat, slide the floor mat Put small loads, like grocery bags, behind the net.
  • Page 110: Sunroof

    Sunroof Comfort Stop: Press and release the OPEN/CLOSE switch rearward to the second position to express open the glass panel to the comfort stop position. The If your vehicle has this comfort stop position is designed to help reduce noise option, the switches are and make the passengers more comfortable.
  • Page 111: Mirrors

    Vehicle Personalization 2. Adjust the driver’s seat and lumbar position to a safe and comfortable driving position. Adjust both outside mirrors to suit you. See Outside Power Memory Seat and Mirrors Mirrors on page 2-37. 3. Press and hold the MEMORY button (1 or 2) corresponding with your DRIVER # displayed on the If your vehicle has this DIC for longer than three seconds.
  • Page 112 To recall your memory positions, your vehicle must be To recall the exit position, your vehicle must be in in PARK (P). Push and release the MEMORY PARK (P). Push and release the EXIT button and the button (1 or 2) corresponding to the desired driving seat will move to the exit position previously stored position.
  • Page 113 NOTES 2-50...
  • Page 114: Instrument Panel

    Instrument Panel Instrument Panel Overview ......-3-2 Traction Control System (TCS) Warning Light ... 3.37 Traction Control System Active Light ....3.38 Hazard Warning Flashers ..........Engine Coolant Temperature Gage 3.38 Other Warning Devices ........Horn ..................Malfunction Indicator Lamp 3.39 Tilt Wheel .............
  • Page 116: Audio System(S)

    The main components of your instrument panel are the I. Instrument Panel Brightness Knob following: J. Trip Odometer Buttons A. Air Outlet K. Hood Release B. Turn SignaVMultifunction Lever L. Parking Brake C. Steering Wheel Controls for Climate Control System M.
  • Page 117: Hazard Warning Flashers

    Hazard Warning Flashers The hazard warning flasher button is located in the center of the instrument panel. Your hazard flashers work no matter what position your key is in, and even if the key isn’t in. Press the button to make the front and rear turn signal lamps flash on and off.
  • Page 118: Vehicle

    Other Warning Devices To tilt the wheel, hold the wheel and pull the lever If you carry reflective triangles, you can set one up at toward you. Then move the the side of the road about 300 feet (100 m) behind your wheel to a comfortable vehicle.
  • Page 119: Turn Signavmultifunction Lever

    Turn SignaVMultifunction Lever Turn and Lane-Change Signals The turn signal has two upward (for right) and two downward (for left) positions. These positions allow you to signal either a turn or a lane change. To signal a turn, move the lever all the way up or down. When the turn is finished, the lever will return automatically.
  • Page 120 As you signal a turn or a lane change, if the arrows Headlamp High/Low-Beam Changer flash very fast, a bulb may be burned out and To change the headlamps from low beam to high, push other drivers won’t see your turn signal. the lever away from you until you hear a click.
  • Page 121 Flash-to-Pass Windshield Wipers This feature lets you use your high-beam headlamps to signal a driver in front of you that you want to pass. It works even if your headlamps are off. To use it, pull the turn signal lever toward you. Your high-beam headlamps will turn on.
  • Page 122 RainsenseTM II Wipers For a single wiping cycle, move the lever down to MIST. Hold it there until the wipers start, then release it. The The moisture sensor is mounted on the interior side of wipers will stop after one cycle. If you want more cycles, the windshield below the rearview mirror and is used hold the lever on MIST longer.
  • Page 123 Windshield Washer The RainsenseTM system is activated by moving the wiper lever up to the INT position and turning the The lever on the right side of your steering column also INT ADJ band to one of the five sensitivity levels within controls your windshield washer.
  • Page 124 Cruise Control If your vehicle is in cruise control when the traction control system begins to limit wheel spin, the cruise With cruise control, you can maintain a speed about control will automatically disengage. See Traction 25 mph (40 km/h) or more without keeping your foot Control System (TCS) on page 4-8.
  • Page 125 Resuming a Set Speed Setting the cruise control at a desired speed and then applying the brake will end the cruise control function. Once you’re going about 25 mph (40 km/h) or more, you can briefly push the cruise control lever up to RES-ACC (Resume-Accelerate) to reset.
  • Page 126 Using Cruise Control on Hills To increase your speed in very small amounts, move the lever up to RES-ACC briefly and then How well your cruise control will work on hills depends release it. Each time you do this, your vehicle will go upon your speed, load, and the steepness of the about 1 mph (1 -6 km/h) faster.
  • Page 127: Exterior Lamps

    Exterior Lamps { O O : (Parking Lamps): Turning the switch to this position turns on the parking lamps, together with the following: The lever on the left side of the steering column Sidemarker Lamps operates the exterior Taillamps lamps. License Plate Lamps Instrument Panel Lights (Headlamps): Turning the switch to this position...
  • Page 128 Wiper-Activated Headlamps A light sensor on top of the instrument panel makes the DRL work, so be sure it isn’t covered. This feature turns on the low-beam headl,amps, instrument panel cluster backlighting and taillamps after The DRL system will make your high-beam headlamps the windshield wipers have been in use for come on at reduced brightness in daylight when the approximately six seconds.
  • Page 129 Fog Lamps If the exterior lamps control is in the parking lamps position at night, only the parking lamps will be on. If the transaxle is out of PARK (P), only the parking lamps To turn on only the front will be active and the HEADLAMPS SUGGESTED fog lamps, turn the fog message will be displayed on the DIC.
  • Page 130: Interior Lamps

    Exterior Lighting Battery Saver Interior Lamps If the exterior lamps control has been left on, the Instrument Panel Brightness exterior lamps will turn off approximately 10 minutes This feature controls the brightness of the instrument after the ignition is turned to OFF and any door panel lights.
  • Page 131 Courtesy Lamps Entry Lighting If it is dark enough outside and the front reading lamp If it is dark enough outside and you press the unlock slider lever, located on the overhead console, is in symbol on the remote keyless entry transmitter while all doors are closed, the interior courtesy lamps will the DOOR position, when any door is opened all of the come on and stay on for approximately 40 seconds.
  • Page 132 Theater Dimming Parade Dimming This feature allows for a three to five-second fade out of To activate the instrument panel backlighting during the the overhead courtesy lamps instead of immediate day, turn the exterior lamps control to the parking turn off after you remove the key from the ignition. They lamp position.
  • Page 133 Front Reading Lamps tear Reading Lamps These lamps will come on when you open the doors. You can also turn them on by pressing the button on the side of the lamp. Press it again to turn them off. These lamps and the interior courtesy lamps will come Inadvertent Power Battery Saver on when you open a door.
  • Page 134: Accessory Power Outlets

    Battery Load Management Accessory Power Outlets The battery load management feature is designed to With accessory power outlets you can plug in auxiliary monitor the vehicle’s electrical load and determine when electrical equipment such as a cellular telephone or the battery is in a heavy discharge condition. During CB radio.
  • Page 135: Ashtrays And Cigarette Lighter

    To clean an ashtray, make sure the cover is open fully, Certain electrical accessories may not be compatible then lift out the ashtray by pulling on the snuffer. with the accessory power outlet and could result in blown vehicle or adapter fuses. If you experience a To use a lighter, push the center all the way in and let it problem, see your dealer for additional information go.
  • Page 136: Climate Controls

    Climate Controls 1. Press both the mode and the fan knobs to place the system in AUTO. 2. Adjust the temperature to 75" (24" C) on the Automatic Climate Control System display. Choosing the coldest or warmest temperature With this system you can control the heating, cooling setting will not cause the system to heat or cool any and ventilation for your vehicle.
  • Page 137 To change the current mode, use the left knob to select Do not cover the solar sensor located in the center of one of the following: the instrument panel, near the windshield. For more information on the solar sensor, see “Sensors” later in OFF: Turning the left knob to OFF will cause the fan to this section.
  • Page 138 4. Select the coolest temperature. (Recirculation): Press this button to limit the amount of outside air coming into the vehicle. It can be 5. Select the highest fan speed. used to prevent outside air and odors from entering Using these settings together for long periods of time your vehicle or to help heat or cool the air inside your may cause the air inside of your vehicle to become too vehicle more quickly.
  • Page 139 Defogging and Defrosting At speeds above 30 mph (48 km/h), the defogger will operate continuously until you press the REAR There are two modes to clear fog or frost from your button again. After 10 minutes of driving below 30 mph windshield.
  • Page 140 Passenger Temperature Control Outlet Adjustment If your vehicle has this feature, the driver and the Use the lever located in front-seat passenger can select separate temperature the center of each front settings. This feature allows the passenger to select outlet to change the a temperature that is 8"...
  • Page 141: Steering Wheel Climate Controls

    Operation Tips Clear away any ice, snow or leaves from the air inlets at the base of the windshield that may block the flow of air into your vehicle. Use of non-GM approved hood deflectors may adversely affect the performance of the system. Keep the path under the front seats clear of objects to help circulate the air inside of your vehicle more effectively.
  • Page 142: Climate Controls Personalization

    $&‘ 2. Locate memory buttons 1 and 2 on the driver’s door (Fan): Press the up or down arrow on the panel. fan button to override the automatic fan control and increase or decrease the fan speed. 3. Press the memory button on the door panel that corresponds to the number on the back of the TEMP (Temperature): Press either arrow on...
  • Page 143: Warning Lights, Gages And Indicators

    Warning Lights, Gages and Gages can indicate when there may be or is a problem with one of your vehicle’s functions. Often gages Indicators and warning lights work together to let you know when there’s a problem with your vehicle. This part describes the warning lights and gages that When one of the warning lights comes on and stays on may be on your vehicle.
  • Page 144 Instrument Panel Cluster Your vehicle is equipped with this instrument panel cluster, which includes indicator warning lights and gages that are explained on the following pages. The instrument panel is designed to let you know at a glance how your vehicle is running.
  • Page 145 Speedometer and Odometer Your speedometer lets you see your speed in both miles per hour (mph) and kilometers per hour (km/h). Your odometer shows how far your vehicle has been driven, in either miles (used in the United States) or kilometers (used in Canada). The speedometer shows a top speed of 140 mph (220 km/h).
  • Page 146: Safety Belt Reminder Light

    Tachometer Safety Belt Reminder Light When the key turned to ON or START, a chime will come on for several seconds to remind people to fasten their safety belts. The safety belt light will also come on and stay on for several seconds, then flash for several more.
  • Page 147: Air Bag Readiness Light

    Air Bag Readiness Light There is an air bag readiness light on the instrument panel, which shows the air bag symbol. The system If the air bag readiness light stays on after you checks the air bag’s electrical system for malfunctions. start your vehicle, it means the air bag system The light tells you if there is an electrical problem.
  • Page 148: Battery Warning Light

    Battery Warning Light Brake System Warning Light Your vehicle’s hydraulic brake system is divided into two ’ This light will come on parts. If one part isn’t working, the other part can still briefly when you start the work and stop you. For good braking, though, you need vehicle, as a check to both parts working well.
  • Page 149: Anti-Lock Brake System Warning Light

    A PARK BRAKE SET message will be displayed on the Anti-Lock Brake System Warning Driver Information Center (DIC) while the parking Light brake is set and the vehicle is moving. The message will not come on if the transaxle is in PARK (P). With the anti-lock brake If the light comes on while you are driving, pull off the system, the light(s) will...
  • Page 150: Traction Control System (Tcs) Warning Light

    Traction Control System (TCS) The traction control system warning light may come on for the following reasons: Warning Light If you turn the system off by pressing the TC button located on the center console, the warning light will come on and stay on. To turn the system back on, press the button again.
  • Page 151: Traction Control System Active Light

    Engine Coolant Temperature Gage Traction Control System Active Light United States Canada When your traction control system is limiting wheel spin, this light will come on. Slippery road conditions may United States Canada exist if the traction control system active light comes on, adjust your driving accordingly.
  • Page 152: Malfunction Indicator Lamp

    If the coolant temperature is over 262°F (1 28"C), the Malfunction Indicator Lamp message HOT IDLE ENGINE will appear. It means you should reduce the engine load and speed to prevent Check Engine Light the engine from overheating. If the coolant temperature is over 268°F (1 31 "C), the message HOT ...
  • Page 153 This light should come on, as a check to show you it is This system is called OBD II (On-Board working, when the ignition is on and the engine is Diagnostics-Second Generation) and is intended to not running. If the light doesn’t come on, have it assure that emissions are at acceptable levels for the repaired.
  • Page 154 If the light stops flashing and remains on steady, see “If Are you low on fuel? the Light Is On Steady” following. As your engine starts to run out of fuel, your engine If the light continues to flash, when it is safe to do so, may not run as efficiently as designed since small stop the vehicle.
  • Page 155: Oil Pressure Light

    Pressure Light Emissions Inspection and Maintenance Programs If you have a problem with Some state/provincial and local governments have or your oil, this light may stay on after you start your may begin programs to inspect the emission control engine, or come on when equipment on your vehicle.
  • Page 156: Cruise Control Light

    Cruise Control Light n’t keep dri .he oil pressui _ _ _ _ _ _ _ ’ CRUISE you do, your engine can become so hot that catches fire. You or others could be burned. Check your oil as soon as possible and have your vehicle serviced.
  • Page 157: Fuel Gage

    Here are four things that some owners ask about. None Fuel Gage of these show a problem with your fuel gage: At the service station, the gas pump shuts off before the gage reads full. It takes a little more or less fuel to fill up than the gage indicated.
  • Page 158: Driver Information Center (Dic)

    Driver Information Center (DIG) To turn messages on the DIC (except LOW OIL PRESSURE, LOW BRAKE FLUID, PARK BRAKE SET, STARTING DISABLED and the HOT ... STOP ENGINE warning), press the RESET button. Pressing the SELECT right arrow button will allow you to access the following modes, DATE/ET, FUEL, ECON, OIL and GAGE.
  • Page 159 Elapsed Time (ET) Date When the ignition is on, the DIC can be used as a To set the date, press and hold the RESET button for about three seconds while the date is being displayed on stopwatch. The display will show hours and minutes. the DIC.
  • Page 160 Fuel Used Fuel Economy While in the FUEL USED function the display will show Pressing the SELECT down arrow while in the ECON a reading such as: mode displays average fuel economy and instantaneous fuel economy calculated for your specific driving FUEL USED: 10.4 GAL or FUEL USED:...
  • Page 161 Oil Life Remember, you must reset the OIL LIFE yourself after each oil change. It will not reset itself. Also, be The GM Oil Life SystemTM is the only function accessible careful not to reset the OIL LIFE accidentally at any in the OIL mode.
  • Page 162 Gage Tire pressure status, such as the following: TIRE PRESSURE NORMAL or TIRE Pressing the SELECT down arrow while in GAGE mode PRESSURE LOW will allow you to access the battery volts, oil pressure TIRE PRESSURE NORMAL appears when the and tire pressure displays.
  • Page 163: Dic Warnings And Messages

    DIC Warnings and Messages (ExE% ID) Warning Message Other messages or warnings may appear in the DIC LOW TIRE PRESSURE display. For Canadian drivers, in addition to the LOW WASHER FLUID DIC message your DIC will display EXP with number PARK BRAKE SET* after it which reflects the following messages: PASSENGER DOOR AJAR...
  • Page 164 CHECK OIL LEVEL If you ever see the CHECK STABILITY ACTIVE 25: You may see the STABILITY OIL LEVEL message, it indicates that the engine oil level ACTIVE message on the Driver Information Center is 1 to 1 1/2 quarts (0.9 L to 1.4 L) low. The message (DIC).
  • Page 165: Dic Vehicle Personalization

    DIC Vehicle Personalization The next item to be displayed is DRIVER 1 or DRIVER 2. To change the driver number, press the SELECT right arrow. The driver number that you select The DIC can be used to program the following personal should correspond with the number on the back of choice features available with your vehicle: your remote keyless entry transmitter.
  • Page 166 If you unlock the vehicle using the door key instead of PERIMETER LIGHTS YES/NO the transmitter, the personal choice settings will EXT LIGHT TIMEOUT 5 to Seconds correspond to the previous driver of the vehicle as identified by the transmitter, the memory seat control or DISPLAY DRIVER ID YES/NO the DIC.
  • Page 167 Automatic Door Locks ALL DOORS IN PARK YES/NO ALL DOORS AT KEY OFF YES/NO You can program the automatic door lock feature to change to one of the following modes: DRIVERS DOOR IN PARK YES/NO DRIVERS DOOR KEY OFF YES/NO Mode 0: No automatic door lock or unlock.
  • Page 168 If you would like to program your vehicle to Mode 3, do Window Lock Out the following: The number of passenger windows locked out by the 1. Select YES for DOORS LOCK IN GEAR. window LOCK switch can be programmed through 2.
  • Page 169 Security Feedback If you would like to program your vehicle to Mode 1, do the following: You can program the security feedback feature to 1. Select NO for KEY FOB LIGHTS FLASH. change to the following modes: 2. Select NO for KEY FOB HORN CHIRP. Mode 1: No feedback when locking or unlocking the If you would like to program your vehicle to Mode 2, do...
  • Page 170 Delayed Locking The EXT LIGHTS TIMEOUT feature can be changed to the desired setting by using the SELECT right arrow The delayed locking feature, which delays the actual button to toggle from 5 to 30 seconds. Each toggle will locking of the vehicle, can be made active or inactive increase the time by five seconds.
  • Page 171 Memory Seats Outside Curb View Assist Mirror This feature recalls the position of the driver’s seat. The parallel park assist mirror, which tips the passenger When this feature is active, the memory seat and mirror mirror while the vehicle is in REVERSE (R), can be positions will be recalled for the identified driver when made active or inactive through the DIC.
  • Page 172: Audio System(S)

    Audio System(s) four vehicle has a feature called Retained Accessory Power (RAP). With RAP, you can play your audio system even after the ignition is turned off. See Notice: Before you add any sound equipment to “Retained Accessory Power (RAP)” under Ignition your vehicle like a tape player, CB radio, mobile Positions on page 2-23.
  • Page 173: Radio With Cassette And Cd

    Radio with Cassette and CD SCV (Speed-Compensated Volume): With SCV, your audio system adjusts automatically to make up for road and wind noise as you drive. Set the volume at the desired level. Press this button to select MIN, MED or MAX. Each higher choice allows for more volume compensation at faster vehicle speeds.
  • Page 174 < > 3. 1-une in the desired station. SCAN : Press and hold either arrow for two seconds until SC appears on the display and you 4. Press AUTO EQ to select the equalization that best hear a beep. The radio will go to a station, play for a few suits the type of station selected.
  • Page 175 To adjust the fade between the front and the rear AUTO EQ (Automatic Equalizer): Press this button to choose bass, midrange and treble equalization speakers, press and release the AUDIO button until settings designed for country, jazz, talk, pop, rock and FAD appears on the display.
  • Page 176 While you are tuned to an RDS station, the station To use the PTY interrupt feature, press and hold the name or the call letters will appear on the display instead P-TYPE button until you hear a beep on the PTY of the frequency.
  • Page 177 RDS Messages BAND (Alternate Frequency): Alternate frequency allows the radio to switch to a stronger station with the ALERT!: Alert warns of local or national emergencies. same program type. Press and hold BAND for two When an alert announcement comes on the current seconds to turn alternate frequency on.
  • Page 178 TRAF (Traffic): Press this button to seek to a station Your tape bias is set automatically when a metal or chrome tape is inserted. If you want to insert a that broadcasts traffic announcements. TRAF will appear tape while the ignition is off, first press the button with on the display.
  • Page 179 > < (Eject): Press this button, located next to the SEEK : Your tape must have at least three cassette tape slot, to eject a tape. Eject may be seconds of silence between each selection for seek to activated with either the ignition or radio off. Cassettes work.
  • Page 180 REV (Reverse): Press and hold this pushbutton to CLEAN PLAYR (Clean Player): This message may reverse quickly within a track. You will hear sound at a also appear on the radio display to indicate that the cassette tape player needs to be cleaned. It will still reduced volume.
  • Page 181 < > SCAN : Press and hold either arrow for more (Eject): Press this button to eject a CD. Eject may than two seconds until you hear a beep and SCAN be activated with either the ignition or radio off. CDs appears on the display.
  • Page 182: Navigation/Radio System

    NavigatiodRadio System Your vehicle may have the optional navigation radio system that includes Radio Data System (RDS) which will seek out the kind of music you want to listen to. The radio system can also communicate with your navigation system to broadcast announcements on traffic and emergency alert communications.
  • Page 183: Trunk-Mounted Cd Changer

    Trunk-Mounted CD Changer not play and an error will occur. Gently push the tray back into the magazine slot until it locks into place. Repeat this procedure for loading up to 12 discs in the With the optional compact disc changer, you can play up to 12 discs continuously.
  • Page 184 All of the CD functions are controlled by the radio pushbuttons except for ejecting the magazine. Whenever a CD magazine with discs is loaded in the changer, the compact disc symbol will appear on the radio display. If the CD changer is checking the magazine for CDs, the compact disc symbol will flash on the display until the changer is ready to play.
  • Page 185 AM FM: Press this button to listen to the radio when a RDM (Random): Press this pushbutton to play the CD is playing. tracks on the discs in random, rather than sequential, order. If you press SEEK while in the random mode, TP/CD (Tape): Press this button to play a CD when discs and tracks will be scanned randomly.
  • Page 186: Theft-Deterrent Feature

    If any error occurs repeatedly or if an error cannot be 3. Press one of the memory buttons (1 or 2) until you corrected, contact your dealer. If your radio displays an hear two beeps. The beeps confirm that your error number, write it down and provide it to your selection has been saved and can now be recalled.
  • Page 187: Audio Steering Wheel Controls

    Understanding Radio Reception Audio Steering Wheel Controls With this feature, you can control certain radio The range for most AM stations is greater than for FM, functions using the buttons especially at night. The longer range, however, can on your steering wheel. cause stations to interfere with each other.
  • Page 188: Care Of Your Cds

    Your tape player should be cleaned regularly after every You may also choose a non-scrubbing action, wet-type 50 hours of use. Your radio may display CLEAN cleaner which uses a cassette with a fabric belt to PLAYR to indicate that you have used your tape player clean the tape head.
  • Page 189: Care Of Your Cd Player

    Care of Your CD Player If, when you turn on your rear window defogger, you hear static on your radio station, it could mean that a defogger grid line has been damaged. If this is true, The use of CD lens cleaner discs is not advised, due to the grid line must be repaired.
  • Page 190 Driving Your Vehicle ..........Your Driving. the Road. and Your Vehicle ..4-2 City Driving 4-21 ..................Defensive Driving -4-2 Freeway Driving 4.22 ..............Before Leaving on a Long Trip 4-23 Drunken Driving ........Control of a Vehicle ........4-5 Highway Hypnosis 4.24 ........
  • Page 191: Your Driving. The Road. And Your Vehicle

    the floor makes proper defensive driving more Your Driving, the Road, and difficult and can even cause a collision, with resulting Your Vehicle injury. Ask a passenger to help do things like this, or pull off the road in a safe place to do them yourself. These simple defensive driving techniques could save Defensive Driving your life.
  • Page 192 Many adults by some estimates, nearly half the adult same BAC by drinking three 4 ounce (120 ml) glasses of wine or three mixed drinks if each had 1 1/2 ounces population choose never to drink alcohol, so they (45 ml) of a liquor like whiskey, gin or vodka. never drive after drinking.
  • Page 193 0.05 percent or above. A driver with a BAC level of There is a gender difference, too. Women generally have a lower relative percentage of body water 0.06 percent has doubled his or her chance of having a than men. Since alcohol is carried in body water, this collision.
  • Page 194: Control Of A Vehicle

    Control of a Vehicle You have three systems that make your vehicle go where you want it to go. They are the brakes, the ing is very dangerous. Drinking and steering and the accelerator. All three systems have to Your reflexes, perceptions, attentiveness and do their work at the places where the tires meet judgement can be affected by even a small the road.
  • Page 195: Braking

    Sometimes, as when you’re driving on snow or ice, it’s And, of course, actual stopping distances vary greatly easy to ask more of those control systems than the with the surface of the road (whether it’s pavement tires and road can provide. That means you can lose or gravel);...
  • Page 196 Anti-lock Brake System (ABS) Your vehicle has anti-lock brakes. ABS is an advanced electronic braking system that will help prevent a braking skid. When you start your engine and begin to drive away. your anti-lock brake system will check itself. You may hear a momentary motor or clicking noise while this test is going on, and you may even notice that your brake pedal moves a little.
  • Page 197: Traction Control System (Tcs)

    your brakes if that vehicle suddenly slows or stops. conditions. This can help you steer around the obstacle while braking hard. Always leave enough room up ahead to stop, even though you have anti-lock brakes. Using Anti-Lock Don’t pump the brakes. Just hold the brake pedal down firmly and let anti-lock work for you.
  • Page 198 TRAC TRAC United States Canada United States Canada This light will come on when your traction control This light should come on briefly when you start the system is limiting wheel spin. See Traction Control engine. If it stays on or comes on while you are driving, System Active Light on page 3-38.
  • Page 199: Steering

    To turn the system off, Steering press the TC button on the center console. Power Steering If you lose power steering assist because the engine stops or the system is not functioning, you can steer but will take much more effort. Magnetic-Speed Variable Assist Steering Your vehicle is equipped with a steering system that...
  • Page 200 Steering Tips What should you do if this ever happens? Ease up on the accelerator pedal, steer the vehicle the way you Driving on Curves want it to go, and slow down. It’s important to take curves at a reasonable speed. If you have Stabilitrak@, you may see the STABILITY ACTIVE message on the Driver Information Center.
  • Page 201 Steering in Emergencies There are times when steering can be more effective than braking. For example, you come over a hill and find a truck stopped in your lane, or a car suddenly pulls out from nowhere, or a child darts out from between parked cars and stops right in front of you.
  • Page 202: Off-Road Recovery

    Off-Road Recovery If the level of the shoulder is only slightly below the pavement, recovery should be fairly easy. Ease off the You may find that your right wheels have dropped off accelerator and then, if there is nothing in the way, steer so that your vehicle straddles the edge of the edge of a road onto the shoulder while you’re driving.
  • Page 203 So here are some tips for passing: When it looks like a chance to pass is coming up, start to accelerate but stay in the right lane and “Drive ahead.” Look down the road, to the sides don’t get too close. Time your move so you will be and to crossroads for situations that might affect increasing speed as the time comes to move your passing patterns.
  • Page 204: Loss Of Control

    Skidding Try not to pass more than one vehicle at a time two-lane roads. Reconsider before passing the In a skid, a driver can lose control of the vehicle. next vehicle. Defensive drivers avoid most skids by taking reasonable Don’t overtake a slowly moving vehicle too rapidly. care suited to existing conditions, and by not Even though the brake lamps are not flashing, it “overdriving”...
  • Page 205: Driving At Night

    Driving at Night If you have Stabilitrak@, you may see the STABILITY ACTIVE message on the Driver Information Center. See “Stability Active Message” under DIC Warnings and Messages on page 3-50. Of course, traction is reduced when water, snow, ice, gravel or other material is on the road.
  • Page 206 You can be temporarily blinded by approaching Adjust your inside rearview mirror to reduce the headlamps. It can take a second or two, or even several glare from headlamps behind you. seconds, for your eyes to readjust to the dark. When Since you can’t see as well, you may need to slow you are faced with severe glare (as from a driver down and keep more space between you and...
  • Page 207: Driving In Rain And On Wet Roads

    Driving in Rain and on Wet Roads Rain and wet roads can mean driving trouble. On a wet road, you can’t stop, accelerate or turn as well because your tire-to-road traction isn’t as good as on dry roads. And, if your tires don’t have much tread left, you’ll get even less traction.
  • Page 208 Wet brakes can cause accidents. .-2y won't work as well in a quick stop and may cause pulling to one side. You could lose control of the vehicle. After driving through a large puddle water or a car wash, apply your brake pedal lightly until your brakes work normally.
  • Page 209 Hydroplaning doesn’t happen often. But it can if your tires do not have much tread or if the pressure in one or more is low. can happen if a lot of water is standing on the road. If you can see reflections from trees, telephone poles or other vehicles, and raindrops “dimple”...
  • Page 210: City Driving

    City Driving Here are ways to increase your safety in city driving: Know the best way to get to where you are going. Get a city map and plan your trip into an unknown part of the city just as you would for a cross-country trip.
  • Page 211: Freeway Driving

    Freeway Driving The most important advice on freeway driving is: Keep up with traffic and keep to the right. Drive at the same speed most of the other drivers are driving. Too-fast or too-slow driving breaks a smooth traffic flow. Treat the left lane on a freeway as a passing lane.
  • Page 212: Before Leaving On A Long Trip

    Once you are moving on the freeway, make certain you Here are some things you can check before a trip: allow a reasonable following distance. Windshield Washer Fluid: Is the resewior full? Are Expect to move slightly slower at night. all windows clean inside and outside? When you want to leave the freeway, move to the Wiper Blades: Are they in good shape?
  • Page 213: Highway Hypnosis

    Highway Hypnosis Hill and Mountain Roads Is there actually such a condition as “highway hypnosis”? Or is it just plain falling asleep at the wheel? Call it highway hypnosis, lack of awareness, or whatever. There is something about an easy stretch of road with the same scenery, along with the hum of the tires on the road, the drone of the engine, and the rush of the wind against the vehicle that can make you sleepy.
  • Page 214 If you drive regularly in steep country, or if you’re planning to visit there, here are some tips that can make your trips safer and more enjoyable. Keep your vehicle in good shape. Check all fluid Coasting d c in NE1 .L (N) or with the levels and also the brakes, tires, cooling system ignition off is dangerous.
  • Page 215: Winter Driving

    Winter Driving Know how to go uphill. Drive in the highest gear possible. Stay in your own lane when driving on two-lane roads in hills or mountains. Don’t swing wide or cut across the center of the road. Drive at speeds that let you stay in your own lane.
  • Page 216 Include an ice scraper, a small brush or broom, a supply of windshield washer fluid, a rag, some winter outer clothing, a small shovel, a flashlight, a red cloth and a couple of reflective warning triangles. And, if you will be driving under severe conditions, include a small bag of sand, a piece of old carpet or a couple of burlap bags to help provide traction.
  • Page 217 Driving on Snow or Ice What’s the worst time for this? “Wet ice.” Very cold snow or ice can be slick and hard to drive on. But wet Most of the time, those places where your tires meet ice can be even more trouble because it may offer the road probably have good traction.
  • Page 218 Your anti-lock brakes improve your vehicle’s stability If You’re Caught in a Blizzard when you make a hard stop on a slippery road. Even though you have the anti-lock braking system, you’ll want to begin stopping sooner than you would on dry pavement.
  • Page 219 Tie a red cloth to your vehicle to alert police that you’ve been stopped by the snow. Put on extra clothing or wrap a blanket around you. If you have no blankets or extra clothing, make body insulators from newspapers, burlap bags, rags, floor mats anything you can wrap around yourself or tuck under your clothing to keep warm.
  • Page 220 engme must. tlls saves nun your only as lorig fuel. When you run the engine, make it go a little faster than just idle. That is, push the accelerator slightly. This uses less fuel for the heat that you get and car.
  • Page 221: If You Are Stuck: In Sand, Mud, Ice Or Snow

    If You Are Stuck: In Sand, Mud, Ice Notice: Spinning your wheels can destroy parts of your vehicle as well as the tires. If you spin the or Snow wheels too fast while shifting your transaxle back and forth, you can destroy your transaxle. See In order to free your vehicle when it is stuck, you will “Rocking Your Vehicle To Get It Out.”...
  • Page 222: Towing

    Towing Here are some important things to consider before you do recreational vehicle towing: What’s the towing capacity of the towing vehicle? Towing Your Vehicle Be sure you read the tow vehicle manufacturer’s recommendations. Consult your dealer or a professional towing service How far will you tow? Some vehicles have you need to have your disabled vehicle towed.
  • Page 223: Loading Your Vehicle

    Dolly Towing Loading Your Vehicle TIRE-LOADING INFORMATION OCCUPANTS CAP. VEHICLE OT, ADD 28KPA(4PSI) MANUAL FOR MORE INFORMATION Your vehicle can be towed using a dolly. To tow your Two labels on your vehicle show how much weight it vehicle using a dolly, follow these steps: may properly carry.
  • Page 224 And, if you do have a heavy load, you should spread it out. Don't carry more than 176 Ibs. (80 kg) in your MFD BY GENERAL MOTORS CORP trunk. DATE, GVWR , GAWR FRT Czzl THIS VEHICLE CONFORMS TO A L L a L Do no- ad your vehicle any heavier than the GVWR, or either the maximum front or rear GAWR.
  • Page 225 If you put things inside your vehicle like suitcases, Automatic Level Control tools, packages, or anything else they will go as fast This feature keeps the rear of your vehicle level as the as the vehicle goes. If you have to stop or turn load changes.
  • Page 226: Driving Your Vehicle

    Your vehicle can tow a trailer if it is equipped with the Do Decide To Pull A Trailer proper trailer towing equipment. To identify what If you do, here are some important points: the vehicle trailering capacity is for your vehicle, you should read the information in “Weight of the Trailer”...
  • Page 227 You can ask your dealer for our trailering information or advice, or you can write us at: Oldsmobile Customer Assistance Center P.O. Box 33171 Detroit, MI 48232-51 71 In Canada, write to:...
  • Page 228 After you’ve loaded your trailer, weigh the trailer and Will you have to make any holes in the body then the tongue, separately, to see if the weights your vehicle when you install a trailer hitch? If are proper. if they aren’t, you may be able to get them you do, then be sure to seal the holes later when right simply by moving some items around in the you remove the hitch.
  • Page 229 Trailer Brakes Before you start, check the trailer hitch and platform (and attachments), safety chains, electrical connector, Does your trailer have its own brakes? lamps, tires and mirror adjustment. If the trailer has electric brakes, start your vehicle and trailer moving and Be sure to read and follow the instructions for the trailer then apply the trailer brake controller by hand to be brakes so you’ll be able to install, adjust and maintain...
  • Page 230 Passing Turn Signals When Towing a Trailer When you tow a trailer, your vehicle may need a You’ll need more passing distance up ahead when different turn signal flasher and/or extra wiring. Check you’re towing a trailer. And, because you’re a good deal longer, you’ll need to go much farther beyond the with your dealer.
  • Page 231 Driving On Grades But if you ever have to park your rig on a hill, here’s how to do it: Reduce speed and shift to a lower gear before you start 1. Apply your regular brakes, but don’t shift into down a long or steep downgrade.
  • Page 232 When You Are Ready to Leave After Maintenance When Trailer Towing Parking on a Hill Your vehicle will need service more often when you’re pulling a trailer. See the Maintenance Schedule for more 1. Apply your regular brakes and hold the pedal down on this.
  • Page 234: Service And Appearance Care

    Section 5 Service and Appearance Care ............Brakes 5.39 Service ............Battery ............5.42 Doing Your Own Service Work ......-5-4 ..........Jump Starting 5-44 Adding Equipment to the Outside of Your Vehicle ............Headlamp Aiming ..5-50 ......Fuel ..............Bulb Replacement .........
  • Page 235 Section 5 Service and Appearance Care ........Appearance Care Vehicle Identification ........5.90 -5-82 Cleaning the Inside of Your Vehicle Vehicle Identification Number (VIN) 5-90 ....5.82 ....Care of Safety Belts ........Service Parts Identification Label ....5-90 .
  • Page 236: Service

    Service We hope you’ll want to keep your GM vehicle all GM. Genuine GM parts have one these marks: Your dealer knows your vehicle best and wants you to be happy with it. We hope you’ll go to your dealer for all your service needs.
  • Page 237: Doing Your Own Service Work

    Doing Your Own Service Work If you want to do some of your own service work, you’ll want to use the proper service manual. It tells you You can be injured and your vehicle could be much more about how to service your vehicle than this damaged if you try to do service work on a manual can.
  • Page 238: Fuel

    Fuel Gasoline Specifications is recommended that gasoline meet specifications Use of the recommended fuel is an important part of the which were developed by the American Automobile proper maintenance of your vehicle. Manufacturers Association and endorsed by the Canadian Vehicle Manufacturers Association for better Gasoline Octane vehicle performance and engine protection.
  • Page 239: California Fuel

    Additives California Fuel If your vehicle is certified to meet California Emission To provide cleaner air, all gasolines in the United States Standards (see the underhood emission control label), it are now required to contain additives that will help prevent engine and fuel system deposits from forming, is designed to operate on fuels that meet California allowing your emission control system to work specifications.
  • Page 240: Fuels In Foreign Countries

    Filling Your Tank Some gasolines that are not reformulated for low emissions may contain an octane-enhancing additive called methylcyclopentadienyl manganese tricarbonyl (MMT); ask the attendant where you buy gasoline whether the fuel contains MMT. General Motors does not recommend the use of such gasolines. Fuels Fuel vapor is highly flammable.
  • Page 241 To open the fuel door, press the button located on the driver’s door trim near the trunk release button. The ignition does not need to be on. The remote fuel door release will work in all transaxle positions. The trunk release lockout switch must be in OFF for the fuel door to open.
  • Page 242 Pull the tab toward you to release the fuel door. Notice: Prying on a locked fuel filler door can damage it. Use the remote fuel door manual release located in the trunk in the case of a power failure. While refueling, hang the tethered fuel cap from the hook on the fuel door.
  • Page 243 When you put the fuel cap back on, turn it to the right (clockwise) until you hear a clicking sound. Make sure you fully install the cap. The diagnostic system can determine if the fuel cap has been left off or improperly If you get fuel on yourself and then something installed.
  • Page 244: Container

    Filling a Portable Fuel *ontair not fil container is i _ide a vehicle, in a vehicle’s trunk, pickup bed or on any surface other than the ground. Never fill a portable fuel container while it is in Bring the fill nozzle in contact with the your vehicle.
  • Page 245: Checking Things Under

    Checking Things Under CAUTION: the Hood Things that burn can get on hot engine parts and start a fire. These include liquids like fuel, oil, coolant, brake fluid, windshield washer and other fluids, and plastic or rubber. You or An electric fan under the hood can start up others could be burned.
  • Page 246: Hood Release

    Hood Release To open the hood, do the following: 1. Pull the hood release handle, located to the left of the steering wheel under the instrument panel. 2. Then go to the front of the vehicle and pull up on the secondary hood release.
  • Page 248 A. Engine Compartment Fuse Block B. Windshield Washer Fluid Reservoir C. Engine Coolant Surge Tank D. Remote Positive (+) Battery Terminal E. Power Steering Fluid Reservoir F. Passenger Compartment Air Filter G. Remote Negative (-) Terminal H. Engine Oil Fill Cap I.
  • Page 249 Checking Engine Oil Turn off the engine and give the oil several minutes to drain back into the oil pan. If you don’t, the oil It’s a good idea to check your engine oil every time you dipstick might not show the actual level. get fuel.
  • Page 250 When to Add Engine Oil The engine oil fill cap is located near the front of If the oil is at or below the cross-hatched area at the tip the engine compartment. of the dipstick, then you’ll need to add at least one See Engine Compartment quart oil.
  • Page 251 What Kind of Engine Oil to Use RECOMMENDED SAE VISCOSITY GRADE ENGINE OILS RECOMMENDED SAE VISCOSITY GRADE ENGINE OILS Oils recommended for your vehicle can be identified by looking for the starburst symbol. This symbol indicates that the oil has been certified by the American Petroleum Institute (API).
  • Page 252: Engine Oil

    Engine Oil (GM Oil As in the chart shown previously, SAE 5W-30 is the When to Change only viscosity grade recommended for your vehicle. You Life SystemTM) should look for and use only oils which have the API Starburst symbol and which are also identified as Your vehicle has a computer system that lets you know SAE 5W-30.
  • Page 253 What to with How to Reset the Oil Life System Used Oil The GM Oil Life SystemTM calculates when to change Used engine oil contains certain elements that may be your engine oil and filter based on vehicle use. Anytime unhealthy for your skin and could even cause cancer.
  • Page 254: Engine Air Cleaner/Filter

    Engine Air Cleaner/Filter 4. Install a new engine air cleanedfilter if needed. 5. Reverse Steps 1 and 2 to reinstall the cover. Be sure the tabs of the cover fit into the slots of the housing. See Part A: Scheduled Maintenance Services page 6-4 to determine when to replace the air filter.
  • Page 255 Automatic Transaxle Fluid How to Check Because this operation can be a little difficult, you may When to Check and Change choose to have this done at the dealership service department. A good time to check your automatic transaxle fluid level is when the engine oil is changed.
  • Page 256 Checking the Fluid Level Prepare your vehicle as follows: Park your vehicle on a level place. Keep the engine running. With the parking brake applied, place the shift lever in PARK (P). With your foot on the brake pedal, move the shift 3.
  • Page 257: Engine Coolant

    How to Add Fluid Engine Coolant Refer to the Maintenance Schedule to determine what The cooling system in your vehicle is filled with kind of transaxle fluid to use. See Part D: DEX-COOL@ engine coolant. This coolant is designed to remain in your vehicle for 5 years or 150,000 miles Recommended Fluids and Lubricants page 6-15.
  • Page 258 Notice: When adding coolant, it is important that you use only DEX-COOL@ (silicate-free) coolant. If coolant other than DEX-COOL@ is added to the system, premature engine, heater core or Adding a plain water to your cooling radiator corrosion may result. In addition, the engine system can be dangerous.
  • Page 259 Checking Coolant Turning the surge tank pressure cap when the engine and radiator are hot can allow steam and scalding liquids to blow out and burn you badly. Never turn the surge tank pressure even a little when the engine and radiator are hot.
  • Page 260 You can be burl you spill coolant on hot engine parts. Coolant contains ethylene glycol, and it will burn if the engine parts are hot enough. Don’t spill coolant on a hot engine. When replacing the pressure cap, make sure the arrow lines up with the tube.
  • Page 261: Engine Overheating

    Coolant Surge Tank Pressure Cap Overheated Engine Protection Operating Mode The cooling system pressure cap is located on the surge tank. If an overheated engine condition exists and the message HOT STOP ENGINE is displayed, an overheat Notice: Your cooling system pressure cap is a protection mode which alternates firing groups of pressure-type cap and must be tightly installed to cylinders helps prevent engine damage.
  • Page 262 If Steam Is Coming From Your Engine Steam from an overheated engine can burn you badly, even if you just open the hood. Stay away from the engine if you see or hear steam coming from Just turn off and get everyone away from the vehicle until it cools down.
  • Page 263 Your If No Steam Is Coming From If you no longer have the overheat warning, you can drive. Just to be safe, drive slower for about 10 minutes. Engine If the warning doesn’t come back on, you can drive normally. An overheat warning, along with a low coolant message, can indicate a serious problem.
  • Page 264: Cooling System

    Cooling System When you decide it’s safe to lift the hood, here’s what you’ll see: An electric engine cooling fan under the hood can start up even when the engine is not running and can injure you. Keep hands, clothing and tools away from any underhood electric fan.
  • Page 265 If the coolant inside the coolant recovery tank is boiling, don’t do anything else until it cools down. The vehicle should be parked on a level surface. Heater and radiator hoses, and other engine parts, can be very hot. Don’t touch them. If you do, you can be burned.
  • Page 266 Notice: When adding coolant, it is important that you use only DEX-COOL@ (silicate-free) coolant. If coolant other than DEX-COOL is added to the system, premature engine, heater core or Steam and scalding Ii ids from a hot cooling radiator corrosion may result. In addition, the engine system can blow out and burn you badly.
  • Page 267 With plain water or the wrong mixture, your engine could get too hot but you wouldn’t get the overheat warning. Your engine could catch fire and you or others could be burned. Use a mixture of clean, drinkable water and 50/50 DEX COOL@ coolant.
  • Page 268 2. Then keep turning the pressure cap slowly, and remove it. 3. Then fill the coolant surge tank with the 1. Park the vehicle on a level surface. You can proper mixture, to the remove the coolant surge tank pressure cap FULL COLD fill when the cooling system, including the coolant mark line (4.5 inches...
  • Page 269 5. Then replace the pressure cap. Be sure the arrow on the pressure cap lines up like this. 4. With the coolant surge tank pressure cap off, start the engine and let it run until you can feel the upper radiator hose getting hot.
  • Page 270: Power Steering Fluid

    Power Steering Fluid How to Check Power Steering Fluid Turn the key off, let the engine compartment cool down, The power steering fluid wipe the cap and the top of the reservoir clean, then reservoir is near the center unscrew the cap and wipe the dipstick with a clean rag. of the engine compartment Replace the cap and completely tighten it.
  • Page 271 Notice: Windshield Washer Fluid When using concentrated washer fluid, follow What to Use the manufacturer’s instructions for adding water. When you need windshield washer fluid, be sure to read Don’t mix water with ready-to-use washer fluid. the manufacturer’s instructions before use. If you will Water can cause the solution to freeze and be operating your vehicle in an area where the damage your washer fluid tank and other parts...
  • Page 272: Brakes

    Brakes your brake system fixed, since a leak means that sooner or later your brakes won’t work well, or won’t work at all. Brake Fluid So, it isn’t a good idea to “top off’ your brake fluid. Adding brake fluid won’t correct a leak. If you add fluid when your linings are worn, then you’ll have too DOT3 much fluid when you get new brake linings.
  • Page 273 Notice: What to Add Using the wrong fluid can badly damage brake When you do need brake fluid, use only DOT-3 brake system parts. For example, just a few drops of fluid. Refer to Part D: Recommended Fluids and mineral-based oil, such as engine oil, in your Lubricants on page 6-75.
  • Page 274 Brake Wear Notices Continuing to drive with worn-out brake pads could result in costly brake repair. Your vehicle has four-wheel disc brakes. Some driving conditions or climates may cause a brake Disc brake pads have built-in wear indicators that make squeal when the brakes are first applied or lightly a high-pitched warning sound when the brake pads applied.
  • Page 275: Battery

    Replacing Brake System Parts The battery is located under the rear seat cushion. To access the battery, see Removing the Rear Seat The braking system on a vehicle is complex. Its many Cushion on page 5-95. You don’t need to access the parts have to be of top quality and work well together if battery to jump start your vehicle.
  • Page 276 Vehicle Storage If you’re not going to drive you vehicle for 25 days or more, remove the black, negative cable from the battery. This will help keep your-battery from running down. Batteries have acid that can burn you and gas that can explode.
  • Page 277: Jump Starting

    Jump Starting Notice: If the other system isn’t a 12-volt system with a negative ground, both vehicles can be damaged. If your battery has run down, you may want to use another vehicle and some jumper cables to start your 2.
  • Page 278 4. Open the hood on the other vehicle and locate the You will not see the battery of your vehicle under positive (+) and the negative (-) terminal locations the hood. It is located under the rear passenger on that vehicle. seat.
  • Page 279 Using a match near a battery can cause battery Fans or other moving engine parts can injure gas to explode. People have been hurt doing you badly. Keep your hands away from moving this, and some have been blinded. Use a parts once the engine is running.
  • Page 280 7. Connect the red 9. Now connect the black positive (+) cable to the negative (-) cable to remote positive (+) the negative (-) terminal of the terminal of the good dead battery. Use a battery. Use a remote remote positive negative (-) terminal (+) terminal if the if the vehicle has one.
  • Page 281 10. Connect the other end 11. Now start the vehicle with the good battery and run of the negative (-) the engine for a while. cable at least 18 inches 12. Try to start the vehicle that had the dead battery. If (45 cm) away from it won’t start after a few tries, probably needs...
  • Page 282 To disconnect the jumper cables from both vehicles, do the following: 1. Disconnect the black negative (-) cable from the vehicle that had the dead battery. 2. Disconnect the black negative (-) cable from the vehicle with the good battery. 3.
  • Page 283: Headlamp Aiming

    Headlamp Aiming Notice: To make sure your headlamps are aimed properly, read all the instructions before beginning. Failure to follow these instructions could cause damage to headlamp parts. The vehicle should be properly prepared as follows: The vehicle should be placed so the headlamps are 25 ft.
  • Page 284 Headlamp Horizontal Aiming Headlamp aiming done with the vehicle’s low beam lamps. The high beam lamps will be correctly aimed if the low beam lamps are aimed properly. Turn the horizontal aiming screw (A) until the indicator (B) is lined up with zero. The headlamp aiming devices are under the hood near the headlamps.
  • Page 285 Headlamp Vertical Aiming Notice: Horizontal aiming must be performed before making any adjustments to the vertical aim. Adjusting the vertical aim first will result in an incorrect headlamp aim. 1. Find the aim dot on the lens of the low beam lamps.
  • Page 286 Turn the vertical aiming screw (C) until the headlamp beam is aimed to the horizontal tape line. The top edge of the cut-off should be positioned at the bottom edge of the horizontal tape line. 6. Repeat Steps 4 and 5 for the opposite headlamp. 5-53...
  • Page 287: Bulb Replacement

    Bulb Replacement Halogen Bulbs For the type bulb to use, see Replacement Bulbs on page 5-58. For any bulb changing procedure not listed in this section, contact your dealer. Halogen bulbs have pressurized gas inside and can burst if you drop scratch the bulb.
  • Page 288: Headlamps

    Headlamps 1. Remove the two bolts from the headlamp assembly 3. Disconnect the wiring harness from the headlamp 2. Use a large screwdriver by the outside mount to assembly. separate the lamp assembly from the outboard snap mounting pin. Slide the headlamp assembly outward and lift it out.
  • Page 289 4. Lift the tabs to remove the bulb from the assembly. 8. Slide the lamp assembly back into place by lining up the track on the bottom of the assembly with 5. Replace the bulb. the guide on the vehicle. 6.
  • Page 290 Front Turn Signal and Parking 1. Tip the headlamp assembly and while pressing the release, turn the bulb and socket counterclockwise Lamps to remove them. 2. Replace the bulb in the socket. Once the headlamp assembly has been removed from the vehicle, the front turn signal and parking lamps 3.
  • Page 291: Taillamps, Turn Signal, Stoplamps And Back-Up Lamps

    Taillamps, Turn Signal, Stoplamps 5. Remove the three nuts holding the lamp in place and remove the lamp assembly. and Back-up Lamps 6. While pressing the release, turn the bulb socket assembly counterclockwise to remove it from the 1. Open the trunk. lamp assembly.
  • Page 292: Windshield Wiper Blade Replacement

    Windshield Wiper Blade 2. Push the tab on the wiper blade assembly and pull the assembly down enough to release it from the Replacement “U” hooked end of the wiper arm. Slide the assembly away from the arm. Windshield wiper blades should be inspected at least 3.
  • Page 293: Tires

    Overinflated tires are more lik to be cut, about your tire warranty and where to obtain service, punctured or broken by a sudden see your Oldsmobile Warranty booklet for details. impact such as when you hit a pothole. Keep tires at the recommended pressure.
  • Page 294 When to Check Notice: Don’t let anyone tell you that underinflation or overinflation is all right. It’s not. If your tires Check your tires once a month or more. don’t have enough air (underinflation), you can get the following: Don’t forget your compact spare tire. It should be at 60 psi (420 kPa).
  • Page 295: Check Tire Pressure System

    If the anti-lock brake system warning light comes on, Check Tire Pressure System the check tire pressure system may not be working properly. See your dealer for service. Also, see The check tire pressure system can alert you to a large Anti-Lock Brake System Warning Light on page 3-36.
  • Page 296: Tire Inspection And Rotation

    To reset (calibrate) the system: Tire Inspection and Rotation 1. Turn the ignition switch to ON. Tires should be rotated every 7,500 miles (1 2 500 km). 2. Press the SELECT right arrow on the DIC until you Any time you notice unusual wear, rotate your tires enter the GAGE mode.
  • Page 297 Don’t include the compact spare tire in your tire rotation. After the tires have been rotated, adjust the front and rear inflation pressures as shown on the Tire-Loading Information label. Rust or dirt on a wheel, or on the parts to Reset the Check Tire Pressure System.
  • Page 298: When It Is Time For New Tires

    When It Is Time for New Tires You need a new tire if any the following statements are true: You can see the indicators at three or more places One way to tell when it’s around the tire. time for new tires is to check the treadwear You can see cord or fabric showing through the indicators, which will...
  • Page 299: Buying New Tires

    Buying New Tires To find out what kind and size of tires you need, look at the Tire-Loading Information label. IL..; tires could cause lose control The tires installed on your vehicle when it was new had while driving. If you mix tires of different sizes a Tire Performance Criteria Specification (TPC Spec) or types (radial and bias-belted tires), the number on each tire's sidewall.
  • Page 300 Uniform Tire Quality Grading Treadwear The treadwear grade is a comparative rating based on Quality grades can be found where applicable on the the wear rate of the tire when tested under controlled tire sidewall between tread shoulder and maximum conditions on a specified government test course.
  • Page 301: Wheel Replacement

    Temperature A, B, C Wheel Alignment and Tire Balance The temperature grades are A (the highest), B, and C, The wheels on your vehicle were aligned and balanced representing the tire’s resistance to the generation carefully at the factory to give you the longest tire life of heat and its ability to dissipate heat when tested and best overall performance.
  • Page 302 Used Rep'-cement '"'heels If you need to replace any of your wheels, wheel bolts or wheel nuts, replace them only with new GM original equipment parts. This way, you will be sure to have the right wheel, wheel bolts and wheel nuts for your vehicle.
  • Page 303: Tire Chains

    Tire Chains Notice: If your vehicle has a tire size other than P235/55R17 size tires, use tire chains only where legal and only when you must. Use only SAE Class ”S” type chains that are the proper size for your tires.
  • Page 304: Changing A Flat Tire

    A rear blowout, particularly on a curve, acts much like a skid and may require the same correction you’d use in a skid. In any rear blowout, remove your foot from the accelerator pedal. Get the vehicle under control by Changing a tire can cause an in- steering the way you want the vehicle to go.
  • Page 305 Removing the Spare Tire and Tools The equipment you’ll need is in the trunk. The following steps will tell you how to use the jack and Instructions for changing your tires are on the inside of change a tire. the tire cover. You can rest the cover near you for easy reference while you change the tire.
  • Page 306 2. Remove the wheel wrench and jack from the jack Removing the Wheel Covers container. 3. Remove the compact spare tire from the trunk. insert the hooked end of the wheel wrench in one of the two small notches in the center cover and pry the The tools you’ll be using include the jack (A) and wheel cover off.
  • Page 307 Removing the Flat Tire and Installing the Spare Tire Turn the wheel wrench counterclockwise by hand to lower the jack head until it fits under the vehicle. 1. Position the wheel wrench securely over the wheel nuts and turn the wrench counterclockwise to loosen the wheel nuts, but don't remove them.
  • Page 308 _ _ _ _ Raising , -ur vehic-- h the jack imk. Jpe.., positioned can damage the vehicle and even make the vehicle fall. To help avoid personal injury and vehicle damage, be sure to fit the jack lift head into the proper location before raising the vehicle.
  • Page 309 7 . Remove any rust or dirt from the wheel bolts, mounting surfaces and spare wheel. Never use oil or grease on studs or nuts. If you do, the nuts might come loose. Your wheel could fall off, causing a serious accident. Place the compact spare tire on the wheel-mounting surface.
  • Page 310 9. Put the wheel nuts back on with the rounded end of the nuts toward the wheel. Tighten each nut by hand until the wheel is held against the hub. If a nut cannot be tightened by hand, use the wheel wrench, and see your dealer right away.
  • Page 311 11. Using the wheel Nofice: Improperly tightened wheel nuts can lead wrench, tighten the to brake pulsation and rotor damage. To avoid wheel nuts firmly in a expensive brake repairs, evenly tighten the wheel crisscross sequence as nuts in the proper sequence and to the proper shown.
  • Page 313 Storing the Spare Tire and Tools a jack, a tire or c...er equipment in the passenger compartment of the vehicle could cause injury. In a sudden stop or collision, loose equipment could strike someone. Store all these in the proper place. The compact spare tire is for temporary use only.
  • Page 314 Compact Spare Tire Don't use your compact spare on other vehicles. And don't mix your compact spare tire or wheel with Although the compact spare tire was fully inflated when other wheels or tires. They won't fit. Keep your compact your vehicle was new, it can lose air after a time.
  • Page 315: Appearance Care

    Appearance Care Don’t use any of these unless this manual says you can. In many uses, these will damage your vehicle: Remember, cleaning products can be hazardous. Some Alcohol are toxic. Others can burst into flames if you strike a Laundry Soap match or get them on a hot part of the vehicle.
  • Page 316 Here are some cleaning tips: Leather Always read the instructions on the cleaner label. Use a soft cloth with lukewarm water and a mild soap or saddle soap and wipe dry with a soft cloth. Then, let Clean up stains as soon as you can before the leather dry naturally.
  • Page 317: Care Of Safety Belts

    Care of Safety Belts Wood Panels Use a clean cloth moistened in warm, soapy water (use Keep belts clean and dry. mild dish washing soap). Dry the wood immediately with a clean cloth. Glass Surfaces Glass should be cleaned often. GM Glass Cleaner or a not bleach or dye safety belts.
  • Page 318: Cleaning The Outside Of Your Vehicle

    Cleaning the Outside of Your Finish Care Vehicle Occasional waxing or mild polishing of your vehicle by hand may be necessary to remove residue from the The paint finish on your vehicle provides beauty, depth paint finish. You can get GM-approved cleaning products of color, gloss retention and durability.
  • Page 319 Windshield and Wiper Blades The surface of these wheels is similar the painted surface of your vehicle. Don’t use strong soaps, If the windshield is not clear after using the windshield chemicals, abrasive polishes, abrasive cleaners, washer, or if the wiper blade chatters when running, cleaners with acid, or abrasive cleaning brushes on wax, sap or other material may be on the blade or them because you could damage the surface.
  • Page 320: Sheet Metal Damage

    Sheet Metal Damage At least every spring, flush these materials from the underbody with plain water. Clean any areas where mud and debris can collect. Dirt packed in close areas of If your vehicle is damaged and requires sheet metal the frame should be loosened before being flushed.
  • Page 321: Gm Vehicle Care/Appearance Materials

    GM Vehicle Care/Appearance Vehicle Care/Appearance Materials (cont’d) Materials Description Usage See your GM dealer for more information on purchasing Removes dirt, grime, the following products. smoke and fingerprints. Removes dirt and grime GM Vehicle Care/Appearance Materials Chrome and Wire Wheel from chrome wheels and Cleaner wire wheel covers.
  • Page 322 GM Vehicle Care/Appearance Materials GM Vehicle Care/Appearance Materials (cont’d) (cont’d) Description Usage Odorless swav odor eliminator k e d on Odor Eliminator fabrics, vinyl, leather and carpet. See your General Motors parts department for these products. See Part D: Recommended Fluids and Lubricants on page 6- 15.
  • Page 323: Vehicle Identification

    Vehicle Identification Engine Identification The 8th character in your VIN is the engine code. This code will help you identify your engine, specifications Vehicle Identification Number (VIN) and replacement parts. Service Parts Identification Label You’ll find this label on the underside of the spare tire cover.
  • Page 324: Electrical System

    Electrical System Windshield Wiper Fuses The windshield wiper motor is protected by an internal Add-on Electrical Equipment circuit breaker and a fuse, If the motor overheats due to heavy snow, etc., the wiper will stop until the motor Nofice: Don’t add anything electrical to your cools.
  • Page 325: Fuses And Circuit Breakers

    Fuses and Circuit Breakers Engine Compartment Fuse Block The wiring circuits in your vehicle are protected from The engine compartment short circuits by a combination of fuses and circuit fuse block is located near the front on the breakers. This greatly reduces the chance of fires caused by electrical problems.
  • Page 326 Fuses Usage Powertrain Control Module Battery Right High-Beam Headlamp Left High-Beam Headlamp Ignition 1 Not Used Transaxle Cruise Control Direct Ignition System Injector Bank #2 Not Used Not Used Powertrain Control Module Ignition Oxygen Sensor Fuses Usage Injector Bank Not Used Auxiliary Power Accessory Cigarette Lighter...
  • Page 327 Relays Usage Circuit Usage Breakers High-Beam Headlamp Low-Beam Headlamp Starter Fog Lamps Daytime Running Lamps Fuses Usage Horn Not Used Air Conditioner Clutch Empty HVAC Solenoid Accessory Air Pump A Air Pump Cooling Fan 1 Starter 1 Cooling Fan 2 Cooling Fan Spare Ignition 1...
  • Page 328: Removing The Rear Seat Cushion

    Removing the Rear Seat Cushion To access the battery and rear compartment fuse panels, the rear seat cushion must be removed. This A safety belt that isn’t properly routed through procedure is somewhat difficult. You may wish to have the seat cushion or is twisted won’t provide your dealer do this for you.
  • Page 329 With the seat cushion lowered, push rearward and then press down on the seat cushion until the spring locks on both ends engage. 4. Check to make sure the safety belts are properly routed and that no portion of any safety belt is trapped under the seat.
  • Page 330 Fuses Usage Vent Solenoid Ignition 1 Left Parking Lamp Dimmer Spare Left Front Heated Seat Not Used Rear Door Module Stoplamp ParWReverse Audio Retained Accessory Power (RAP) Not Used Fuses Usage Not Used Fuel Pump Passenger Door Module HVAC Blower Body Memory Interior Lamps...
  • Page 331 Fuses Usage Relays Usage Anti-lock Brake System (ABS) Reverse Turn SignaVHazard Retained Accessory Power (RAP) HVAC Battery Fuel Tank Door Lock Dimmer Not Used Ignition 3 Fuel Tank Door Release Relays Usage Interior Lamps Fuel Pump Trunk Release Parking Lamp Front Courtesy Lamps Ignition 1 Not Used...
  • Page 332 Fuses Usage Circuit Usage Spare Breakers Spare Power Seats Fuse Puller Power Windows Relays Usage Cigar Rear Defogger Fuses Usage Not Used Rear Defog Not Used Audio Amplifier Electronic Level Control (ELC) Cigar Not Used Not Used Not Used Spare Spare Spare Spare...
  • Page 333: Capacities And Specifications

    Capacities and Specifications The following approximate capacities are given in English and metric conversions. Please refer to Part D: Recommended Fluids and Lubricants on page 6- 15 for more information. Capacities Capacities Metric Application English Transaxle Automatic 11 quarts 10.4 L System Engine Cooling Engine Oil with Filter...
  • Page 334: Normal Maintenance Replacement Parts

    Normal Maintenance Replacement Parts 41 -987* Spark Plugs GM Part # 12571535 Windshield Wiper Blades Shepherd’s Hook Type 22.0 inches (56.0 Length *ACDelco@ part number 5-1 01...
  • Page 336 Section 6 Maintenance Schedule Maintenance Schedule ........6. 2 At Least Once a Year ........6.10 Introduction ........... Part C: Periodic Maintenance Inspections ..6.13 6. 2 Your Vehicle and the Environment ....6-2 Steering, Suspension and Front Drive Axle Maintenance Requirements ......
  • Page 337: Maintenance Schedule

    Maintenance Schedule Your Vehicle and the Environment Proper vehicle maintenance not only helps to keep your Introduction vehicle in good working condition, but also helps the environment. All recommended maintenance procedures are important. Improper vehicle maintenance can even affect the quality of the air we breathe. Improper IMPORTANT: fluid levels or the wrong tire inflation can increase KEEP ENGINE OIL...
  • Page 338: How This Section Is Organized

    How This Section is Organized If you want to get the service information, see Service Publications Ordering Information on page 7-9. This maintenance schedule is divided into five parts: “Part B: Owner Checks and Services” tells you what “Part A: Scheduled Maintenance Services” explains should be checked and when.
  • Page 339: Scheduled Maintenance

    This part tells you the maintenance services you should Part A: Scheduled Maintenance have done and when you should schedule them. Services When you go to your dealer for your service needs, you’ll know that GM-trained and supported service This part contains engine oil scheduled maintenance people will perform the work using genuine GM parts.
  • Page 340 Scheduled Maintenance Engine Oil Scheduled Maintenance Change engine oil and filter as indicated by the GM The services shown in this schedule up to 100,000 miles Oil Life SystemTM (or every 12 months, whichever (166 000 km) should be repeated after 100,000 miles occurs first).
  • Page 341 30,000 Miles (50 000 km) After the services are performed, record the date, odometer reading and who performed the service on the 0 Inspect throttle body bore and valve plates for maintenance record pages in Part E of this schedule. deposits, open the throttle valve and inspect all An Emission Control Service.
  • Page 342 50,000 Miles 000 km) 0 Rotate tires. See Tire Inspection and Rotation on page 5-63 for proper rotation pattern and additional Change automatic transaxle fluid and bottom screens information. (See footnote @.) (See footnote if the vehicle is mainly driven under one or more of Replace engine air cleaner filter.
  • Page 343 If you haven’t used your vehicle under severe service 90,000 Miles (150 000 km) conditions listed previously and therefore, haven’t Inspect throttle body bore and valve plates for changed your automatic transaxle fluid, change both deposits, open the throttle valve and inspect all the fluid and filter.
  • Page 344: At Least Once A Month

    Part B: Owner Checks and Services Engine Coolant Level Check Check the engine coolant level and add DEX-COOL@ Listed in this part are owner checks and services coolant mixture if necessary. See Engine Coolant which should be performed at the intervals specified to on page 5-24 for further details.
  • Page 345: At Least Twice A Year

    Automatic Transaxle Check At Least Twice a Year Check the transaxle fluid level; add if needed. See Restraint System Check Automatic Transaxle Fluid on page 5-22. A fluid loss Make sure the safety belt reminder light and all your may indicate a problem. Check the system and repair if belts, buckles, latch plates, retractors and anchorages needed.
  • Page 346 Starter Switch Cher': Automatic Transaxle Shift Lock Control stem Check When you are doing this check, the vehicle could move suddenly. If it does, you or others When you are doing this check, the vehicle could be injured. Follow the steps below. could move suddenly.
  • Page 347 Ignition Transaxle Lock Check Park on a fairly steep hill, with the vehicle facing downhill. Keeping your foot on the regular brake, set the While parked, and with the parking brake set, try to turn parking brake. the ignition key to OFF in each shift lever position. To check the parking brake’s holding ability: With The key should turn to OFF only when the shift lever the engine running and transaxle in NEUTRAL...
  • Page 348: Steering, Suspension And Front Drive Axle Boot And Seal Inspection

    Part C: Periodic Maintenance Exhaust System Inspection Inspections Inspect the complete exhaust system. Inspect the body near the exhaust system. Look for broken, damaged, Listed in this part are inspections and services which missing or out-of-position parts as well as open seams, should be performed at least twice a year (for instance, holes, loose connections or other conditions which each spring and fall).
  • Page 349 Engine Cooling System Inspection Brake System Inspection Inspect the hoses and have them replaced if they Inspect the complete system. Inspect brake lines and hoses for proper hook-up, binding, leaks, cracks, are cracked, swollen or deteriorated. Inspect all pipes, fittings and clamps; replace as needed. Clean the chafing, etc.
  • Page 350 Part D: Recommended Fluids and Usaae FluidLubricant Lubricants DEXRON-Ill Automatic Transmission 8, " gFEi ; Fluid. Fluids and lubricants identified below by name, part Multi-Purpose Lubricant, Superlube Ke Lock number or specification may be obtained from your GM Part No. U.S. 12346241, in inders Lanada 10953474, or dealer.
  • Page 351 Part E: Maintenance Record After the scheduled services are performed, record the date, odometer reading and who performed the service and any additional information from “Owner Checks and Services” or “Periodic Maintenance” on the following record pages. Also, you should retain all maintenance receipts. Maintenance Record 6-1 6...
  • Page 352 Maintenance Record (cont’d)
  • Page 353 Maintenance Record (cont’d)
  • Page 354: Customer Assistance Information

    Section 7 Customer Assistance Information Customer Assistance Information ............7. 2 Courtesy Transportation 7. 6 Customer Satisfaction Procedure ...... Reporting Safety Defects to the United States Customer Assistance for Text Telephone Government ........... (TTY) Users ..........Reporting Safety Defects to the Canadian Customer Assistance Off ices ......
  • Page 355: Customer Assistance Information

    Your satisfaction and goodwill are important to top left of the instrument panel and visible through your dealer and to Oldsmobile. Normally, any concerns the windshield.) with the sales transaction or the operation of your Dealership name and location vehicle will be resolved by your dealer’s sales or service...
  • Page 356 BBB Auto Line U.S. number for assistance. If a customer wishes Council of Better Business Bureaus, Inc. to write to Oldsmobile, the letter should be addressed to 4200 Wilson Boulevard Oldsmobile’s Customer Assistance Center. Suite 800 Arlington, VA 22203-1 804...
  • Page 357 United States All Overseas Locations Oldsmobile Customer Assistance Center Please contact the local General Motors Business Unit. P.O. Box 33171 Mexico, Central America and Detroit, MI 48232-51 71 Caribbean Islands/Countries (Except 1 -800-442-6537 1-800-833-6537 (For Text Telephone devices (TTYs)) Puerto Rico and U.S. Virgin Islands)
  • Page 358 Security While You Travel 1 -800-442-OLDS (6537) This program, available to qualified applicants, can As the proud owner of a new Oldsmobile vehicle, you reimburse you up to are automatically enrolled in the Oldsmobile Roadside $1,000 toward aftermarket Assistance program. This value-added service is...
  • Page 359 Vehicle Identification Number (VIN) Trip interruption expense benefits Vehicle license plate number Dealership locator service Oldsmobile reserves the right to limit services or reimbursement to an owner or driver when, in Oldsmobile Roadside Assistance specifically excludes Oldsmobile’s judgement, the claims become excessive coverage for mounting, dismounting or changing of snow in frequency or type of occurrence.
  • Page 360 Warranty service can generally be completed while you Bumper-to-Bumper coverage provided by the New wait. However, if you are unable to wait Oldsmobile Vehicle Limited Warranty. Several transportation options helps minimize your inconvenience by providing several are available when warranty repairs are required.
  • Page 361: Reporting Safety Defects

    Courtesy Rental Vehicle Courtesy Transportation is available only at participating dealers and all program options, such as shuttle When your vehicle is unavailable due to overnight service, may not be available at every dealer. Please warranty repairs, your dealer may arrange to provide contact your dealer for specific information about you with a courtesy rental vehicle or reimburse you for a availability.
  • Page 362 General Motors. Please call us at 1-800-442-6537, or write: To contact NHTSA, you may either call the Auto Safety Oldsmobile Customer Assistance Center Hotline toll-free at 1-800-424-9393 (or 366-0123 in P.O. Box 33171 the Washington, D.C. area) or write to: Detroit, MI 48232-51 71 NHTSA, U.S.
  • Page 363 Transmission, Transaxle, Transfer Without Portfolio: Owner’s Manual only. Case Unit Repair Manual RETAIL SELL PRICE: $25.00 Current and Past Model Order Forms This manual provides information on unit repair service procedures, adjustments, and specifications for GM Service Publications are available for current and transmissions, transaxles, and transfer cases.
  • Page 364 Appearance Care (cont.) Chemical Paint Spotting ....... 5-87 Accessory Power Outlets 3-21 ......... Cleaning the inside of Your Vehicle 5-82 ....Adding Washer Fluid 5-38 ........Cleaning the Outside of Your Vehicle 5-85 ....Additional Program Information ............... Finish Damage 5-87 Additives, Fuel ..........
  • Page 365 ................. Automatic Climate Control System 3-23 Brake Fluid 5-39 ..................Automatic Door Locks 3-54 Brake Wear 5-41 ............Automatic Headlamp System ......3-1 6 Brakes 5-39 ............Automatic Level Control ........4-36 Braking Automatic Operation ........3-23 Braking in Emergencies ................
  • Page 366 Care of Child Restraints (cont.) Safety Belts ... 5-84 Securing a Child Restraint in the Right Front Care of Your Seat Position ........... 1-44 ........Cassette Tape Player 3-74 ........... Top Strap 1-38 ..........CD Player 3-76 Top Strap Anchor Location ......1-39 CDS ............
  • Page 367 Coolant ......Engine Temperature Gage 3-38 .......... Date/Elapsed Time 3-45 Heater. Engine ..........2-25 ........Daytime Running Lamps 3-15 Surge Tank Pressure Cap ......5-28 Defensive Driving ..........Cooling System ..........5-31 ......... Defogging and Defrosting 3-26 Courtesy Lamps ..........3-18 Delayed Entry Lighting ........
  • Page 368 _ _ _ ..Driver Information Center (DIC) 3-45 Engine DIC Vehicle Personalization ......3-52 Air Cleaner/Filter ......... 5-21 DIC Warnings and Messages ....3-50 ............Battery 5-42 Driving Check and Service Engine Soon Light .... 3-39 At Night ............. 4-16 Coolant ............
  • Page 369 Fuel (cont.) Fuels in Foreign Countries ................FabricKarpet 5-82 Gage ............3-44 Filter Gasoline Octane ........... Engine Air Cleaner 5-21 ........Gasoline Specifications ........Finding a PTY Station ........3-63 System Inspection ........6-13 Finding a Station 3-60 ..........Fuel Economy 3-47 ..........
  • Page 370 ..How to Check Power Steering Fluid 5-37 ..How to Use This Manual ........Hazard Warning Flashers ........How to Wear Safety Belts Properly ....1-13 Head Restraints ........
  • Page 371 Leaving Your Vehicle ........2-14 Instrument Panel ..Cluster ....3-31 ....Leaving Your Vehicle With the Engine Running 2-31 ..Overview ........Light Instrument Panel Brightness ...... 3-17 ........Air Bag Readiness 3-34 Interior Lamps ..........3-17 ....
  • Page 372: Exhaust System Inspection

    Maintenance Schedule (cont.) Your Vehicle and the Environment ....6-2 .... Magnetic-Speed Variable Assist Steering 4-1 0 Maintenance When Trailer Towing ..... 4-43 Maintenance. Normal Replacement Parts ..5-1 01 ..........Making Turns 4-41 Maintenance Schedule Malfunction Indicator Light ........ 3-39 ........
  • Page 373: Part D Recommended Fluids And Lubricants

    ......Outside Curb View Assist Mirror 3-58 Overheated Engine Protection Operating Mode ... 5-28 ........Navigation System 3-69 Overriding Lock Delay ........2-12 ........New Vehicle Break-In 2-23 ....Owners, Canadian ........Normal Maintenance Replacement Parts 5-101 Owner’s Information ........7-10 ..........
  • Page 374 ....... Perimeter Lighting 3 . 1 9 . 3-57 ...... Personalization. Climate Controls 3-29 ............Radios 3-59 ........Personalization Features ....Care of Your Cassette Tape Player 3-74 ........ 7-7 Plan Ahead When Possible Care of Your CD Player ....... 3-76 Playing a Cassette Tape ........
  • Page 375 ..Right Front Passenger Position. Safety Belts 1-21 Reclining Seatbacks ............... Recreational Vehicle Towing 4-33 Roadside Remote Keyless Entry System ......Assistance Program ........... Remote Keyless Entry System, Operation Rocking Your Vehicle To Get It Out ....4-32 ........
  • Page 376 ....Seats Setting the Tone (Bassnreble) 3-61 ................ Head Restraints Sheet Metal Damage 5-87 ..........Heated Seats Shifting Into Park (P) ........2-30 ................Manual Lumbar Shifting Out of Park (P) 2-32 ....................Manual Passenger Skidding 4-15 .............
  • Page 377 Tires (cont.) Wheel Alignment and Tire Balance ..5-68 ..Tachometer ......3-33 ..5-68 Wheel Replacement ......Taillamps ....When It Is Time for New Tires 5-65 Turn Signal, Stoplamps and Back-up Lamps ..
  • Page 378 Trip Odometers ..........3-32 Vehicle Personalization ........................Trunk 2-14 3-52 ..............Trunk Lock Release 2-15 Memory Seat and Mirrors 2-48 .................. Trunk Release Lockout 2-15 Vehicle Storage 5-43 ........Turn and Lane-Change Signals ......3-6 Ventilation Adjustment 3-27 ......
  • Page 379 Windshield Washer Fluid Level Check ....6-9 When to Change Engine Oil ........ (GM Oil Life SystemTM) 5-19 Windshield Wiper When to Check ..........5-61 Blade Replacement ........5-59 ......When Check and Change 5-22 ............Fuses 5-91 ....When to Check Power Steering Fluid 5-37 ..........

Table of Contents