Oldsmobile AURORA 2001 Owner's Manual page 173

PUSHBUTTONS: The six numbered pushbuttons let
you return to your favorite stations. You can set up to
18 stations (six AM, six FM1 and six FM2). Just:
1. Turn the radio on.
-
2. Press AM FM to select the band.
3. Tune in the desired station.
4. Press AUTO EQ to select the equalization that best
suits the type of station selected.
5. Press and hold one of the six numbered buttons
until you hear a beep. Whenever you press that
numbered button, the station you set will return
and the equalization that you selected will also be
automatically selected for that button.
6. Repeat the steps for each pushbutton.
PRESET SCAN: Press and hold the SEEK button for
more than four seconds until you hear a double beep and
PRESET SCAN appears in the display. Use PRESET
SCAN to listen to each of your preset stations for a
few seconds. The radio will go to the first preset station
stored on your pushbuttons, stop for a few seconds, then
go on to the next preset station. Press the SEEK button
again to stop scanning presets.
3-12
Setting the Tone
BASS: Press the AUDIO button until BASS appears on
the display. Turn the audio knob to increase or decrease
bass. When you use this control, the radio's tone setting
will switch to manual.
MID: Press the AUDIO button until MID appears on
the display. Turn the audio knob to increase or decrease
bass. When you use this control, the radio's tone setting
will switch to manual.
TREB: Press the AUDIO button until TREB appears
on the display. Turn the audio knob to increase or
decrease treble. When you use this control, the radio's
tone setting will switch to manual. If a station is weak or
noisy, you may want to decrease the treble.
Pressing and holding the AUDIO button for at least
two seconds will return all tone settings, including
BALANCE and FADE to FLAT.
AUTO EQ: This feature allows you to choose preset
bass, mid and treble equalization settings designed for
country, jazz, talk, pop, rock and classical stations.
The last setting will appear on the display when you
first press AUTO EQ. Each time you press AUTO EQ,
another setting will appear on the display. Press AUTO EQ
again after TALK appears and MANUAL will appear.