Smeg Oven Instructions For Use Manual page 20

EN
Cooking start: as well as setting a cooking time, the cooking start time can also
be set (with a maximum delay of 12 hours in relation to the current time). To set
the cooking start/end time, proceed as follows:
• Set the cooking time as described in the previous point.
• Within 5 seconds of last pressing key
the cooking end time. Symbol
current time, with the internal segments illuminated to show the end of
cooking time. Use keys
• 5 seconds after the last key is pressed, the display will show the current time
and the cooking start and end times, which will be represented by the
illuminated inside segments. The display segments will be constantly
illuminated as long as the current time is not the same as the cooking start
time; as soon as the current time reaches the set starting time, all the inside
segments will start to flash, indicating that the oven has started cooking.
• At the end of the cooking time the timer will switch the oven heating
elements off, the buzzer will start to sound and the numbers on the dial will
flash.
• To delete the entire set program, hold down the central key
cooking has already started, the oven will have to be switched off manually.
• Here we can see a programming example: the
current time is 7.06 and cooking is programmed
to start at 8.00 and end at 9.00.
• At 8 o'clock the inside segments between 8 and 9
will start to flash, while the hours hand will remain
still.
Warning: for the oven to start cooking after the programming procedures
just described, the thermostat and functions switch knob must be
correctly set on the required temperature and function.
7.7.4 Display brightness reduction
To reduce energy consumption in stand-by, briefly press key
display brightness. To restore the normal brightness, press
22
Instructions for the user
and
or , press key
will flash on the display together with the
to set the cooking end time.
again to set
for 2 seconds; if
to reduce the
again.