Brinkmann 1575 ProSeries Owner's Manual page 32

Step 21
Place the sear burner grate
as illustrated. Install the sear burner
control knob onto valve stem.
Step 22
Attach electrode wire to the igniter
wire as illustrated.
Step 23
Loosen pre-attached bolts located
on back of the grill assembly. Place
wind deflectors over pre-attached
bolts slide down to lock into place.
Tighten bolts securely.
Step 24
Hang grease cup from brackets
underneath backside of grill.
31
Electrode Wire
Igniter Wire
Wind Deflectors
Grease Cup
Meijer.com
Sear Burner
Grate
Sear Burner
Control Knob
Bezel
Electrodes