Angle Setting - Sharp CD-G7500DVD Operation Manual

Direct time skip
H
1
Press the DIRECT button three
times to select .
2
Use the 0 - 9 buttons to enter the
time to which you want to skip.
I You can also enter the time by pressing the cursor
To do so, press the cursor
you want to enter the time.
3
Press the ENTER button.
The image jumps to the point you specified.
Notes:
I The time you can enter depends on the time recorded on a disc.
I The direct time skip function is not performed with discs on which no
times are recorded.
Subtitle language setting
H
Example: Selecting "3 SPANISH"
1
Press the SET UP button whilst pressing down the SHIFT
button during playback.
The function control screen appears.
2
Use the cursor or button to
select and then press the
ENTER button.
3
Press the cursor or
to select the subtitle language
you want to use.
You can also toggle the setting between "ON" and "OFF" by pressing
the cursor or button.
4
Press the ENTER button to confirm the setting.
You can exit the function control screen by pressing the SET UP button
whilst pressing down the SHIFT button or the RETURN button.
*CD-G7500DVD(EN)36-39 38
2 / 5
1 0 / 3 0
D D V
– – : – – : : – –
D D V
0 1 : 0 6 – –
or button.
or button to select the place where
D D V
2 E N G L I S H
button
D D V
3 S P AN I S H
Notes:
I You can also press the SUB TITLE button on the remote control for the
same operation in step 3.
(You do not need to do the steps 1 and 2.)
I This function can only be used for discs on which subtitles have been
recorded with multiple subtitles.
I Some DVD discs are marked "Forced Display", indicating that the subtitling
cannot be suppressed. With such discs, the subtitles will be displayed even
when you select " OFF". This does not indicate a fault with your unit.
I If no subtitles are recorded on the disc, "

Angle setting

H
You can change the angle of view when playing a DVD video disc that contains
scenes recorded from multiple angles.
1
Press the SET UP button whilst pressing down the SHIFT
button during playback.
The function control screen appears.
2
Use the cursor or button
to select and then press the
ENTER button.
3
Press the cursor or button
to select the angle number you
want.
The number of recorded angles differs
depending on the disc used.
4
Press the ENTER button to confirm the setting.
You can exit the function control screen by pressing the SET UP button
whilst pressing down the SHIFT button or the RETURN button.
Notes:
I You can also press the ANGLE button on the remote control for the same
operation in step 3.
(You do not need to do the steps 1 and 2.)
I This function can only be used for discs on which scenes shot from multiple
angles have been recorded.
05.1.13, 14:43
CD-G7500DVD (S)
TINSZA159AWZZ
CD-G7500DVD
CP-G7500
ENGLISH
xx" is displayed.
D D V
H
1
D D V
E-38
7