Table of Contents
Advertisement
CD-G10000V
Listening to a cassette tape (TAPE 1 or TAPE 2) (continued)
CP-G10000
ENGLISH
" Tape 2 playback
1
Press the ON/STAND-BY button to turn the power on.
2
Press the TAPE (1
2) button to select TAPE 2.
3
Open the cassette door by
pushing the area marked
" ".
4
Load a cassette into the
TAPE 2 cassette compart-
ment with side A facing
you.
5
Press the
button to choose one side or both
sides.
... To listen to both sides.
To play both sides ( ), start from side A. When playback starts
from side B, side A will not be played.
... For endless repeat play of both sides.
... To listen to one side.
6
Press the
/
(
SELECT/RESUME) button to listen to
side A, or the
[
(TAPE-2)] button for side B.
Forward play
E-35
" Various tape functions
Side A play-
back
Side B play-
back
(TAPE 2
only)
Stop
Fast for-
ward/Fast
rewind
(TAPE 2
only)
Reverse play
Caution:
! To remove the cassette, press the
! Before changing from one tape operation to another, press the
! If a power failure occurs during tape operation, the tape head will
04/3/22
Function
Main unit
Remote
control
( /RETURN) button, and
then open the compartment.
( /RETURN) button.
remain engaged with the tape and the cassette door will not
open. In this case, wait until the power is restored.
CD-G10000V(Z)E4.fm
Operation
Press in the stop
mode.
Press in the stop
mode.
Press in the playback,
fast forward or fast re-
wind mode.
Press in the playback
or stop mode.
TINSZA092AWZZ
Advertisement
Table of Contents
