Sharp CD-G10000V Operation Manual page 12

CD-G10000V
System connections (continued)
CP-G10000
ENGLISH
! Placing the speaker system
To enjoy the surround effect, we recommend that you place each
speaker as shown to the below.
Active
subwoofer
Front
speaker
(left)
Surround
speaker
(left)
Notes:
" The speakers are magnetically shielded.
Therefore, they do not affect the display even you use them near
the TV. However, some colour variation may occur, depending on
the type of TV used.
If colour variation occurs...
Turn off the TV (from the power switch).
After 15 - 30 minutes, turn the TV on again.
If the colour variation is still present...
Move the speakers further away from the TV.
" If any kind of magnet or an electromagnet is placed too close to
the TV and the system, irregular colours may appear on the TV
screen.
Note:
The speaker grilles are not removable.
E-11
! TV/monitor connection
If the TV/monitor has a video input, connect it to the VIDEO OUT
socket on the rear of the unit.
TV
Main unit
Front
speaker
(right)
Surround
speaker
(right)
Note:
If the TV/monitor does not have a video input, the VIDEO OUT
socket on the unit should be connected to a VCR with a video input,
which in turn should be connected to the TV/monitor through the TV
ANTENNA/CABLE input. (Be sure to turn on the VCR, and set the
VCR's input mode to "auxiliary".)
04/3/22
To video
input socket
Video cable
CD-G10000V(Z)E2.fm
TINSZA092AWZZ
TV