Partially Reflective Glass Replacement - Dimplex EWMC-CC-SS Service Manual

PARTIALLY REFLECTIVE gLASS
REPLACEMENT
WARNINg: If the fireplace was operating prior to
servicing allow at least 10 minutes for light bulbs and
heating elements to cool off to avoid accidental burning
of skin.
WARNINg: Disconnect power before attempting any
maintenance or cleaning to reduce the risk of electric
shock or damage to persons.
Tools Required: Phillips head Screwdriver
1. Remove wall mounted unit from corner and lay unit on
its side.
2. Open latched door.
3. Remove door chain bolt and nut from back panel as-
sembly.
4. Remove top partially reflective glass bracket from back
panel and set aside.
5. Remove partially reflective glass from unit and remove
black rubber channels from partially reflective glass.
6. Install black rubber channels to replacement partially
reflective glass.
7. Reassemble in the reverse order as above.
11