Synchronising The Tcp/Ip Settings With The Gigaset Se361 Wlan - Siemens Gigaset SE361 WLAN User Manual

ì
Deactivate the option Block Popup Windows on the Web Features screen.
ì
Click on OK to finish.

Synchronising the TCP/IP settings with the Gigaset SE361 WLAN

You have now configured your PC so that it is ready to be connected to the Gigaset
SE361 WLAN. You now have to release the old TCP/IP settings and synchronise them
with the settings of your Gigaset SE361 WLAN.
ì
On the Windows Desktop, click on Start – Programs – Accessories – Command
prompt.
ì
Then enter the ipconfig /release command and press the ENTER key.
ì
Then enter the ipconfig /renew command and press the ENTER key.
If the default IP address (192.168.2.1) of the Gigaset SE361 WLAN was not changed,
the IP address should now read 192.168.2.x (with x being a number between 2 and
255). The Subnet Mask must always be 255.255.255.0 and the Standard Gateway
must have the IP address of the Gigaset SE361 WLAN (192.168.2.1). These values
confirm that your Gigaset SE361 WLAN is working.
ì
Enter exit and press the ENTER key to close the Command prompt window.
Configuring the local network
83