Siemens Gigaset SE361 WLAN User Manual page 30

Basic Setup Wizard
ì
Select how Internet sessions are to be established via the Connection mode:
– Select Always on if the connection is to remain set up when the Gigaset SE361
WLAN is switched on.
Note:
If you subscribe to a time-based service, this option can result in high connec-
tion charges.
– Select Connect on demand if applications such as a Web browser or an e-mail
program are allowed to connect to the Internet automatically.
– In the Idle time before disconnect field, enter a period of time after which the
Internet connection is to close down automatically if no data is transmitted
(default setting: 3 minutes, range: 1 to 99 minutes).
This time setting only applies to the Connect on request option. A permanent
connection is achieved using the Always on option.
– Select Connect manually if you always want to establish and end the connection
to the Internet manually. If you subscribe to a time-based service this will save
you high connection charges. How to establish a connection manually is
described on page 68.
ì
Click on Test Settings to check the Internet connection. The device will attempt to
connect to the Internet. Any Internet connection already in existence will be closed
first.
You will find information about the test steps and results on the Internet Connec-
tion Test screen.
PPPoE pass-through
PPPoE pass-through enables you to use an additional Internet connection (with another
service provider) from one PC. You can find detailed information about this on page 42.
ì
Activate PPPoE pass-through if you wish to use this function.
Using UPnP (Universal Plug & Play)
PCs with UPnP (Universal Plug & Play) can offer their own network services and auto-
matically use services offered on the network. You can find detailed information about
this on page 43.
ì
Activate UPnP if you wish to use this function.
ì
Click on Next > to proceed to the next step.
30