Saving And Restoring A Configuration; Saving Configuration Data - Siemens Gigaset SE361 WLAN User Manual

Administration and status information
Note:
If you permit any PCs, then anyone who finds out your password can access this
user interface and therefore also your network! If this option is needed, you
should always only activate it for a short time.
Remote Management for one particular PC:
ì
In the IP address field, enter the IP address of the PC that is to have access to the
user interface of the Gigaset SE361 WLAN from outside your local network.
Remote Management for PCs in a specific IP address block:
ì
In the First IP address and Last IP address fields, enter the IP address block of the
PCs that are to have access to the user interface of the Gigaset SE361 WLAN from
outside your local network.
Note:
u
The Internet provider might assign the IP address to the PC dynamically. This
can then change the IP address. Make sure that the PC that is to access the
router from the Internet always has the same IP address.
u
To access the configuration environment via Remote Management, you must
enter the Public IP address
following format in the browser: http://X.X.X.X:8080 (x.x.x.x stands for
the public IP address of the Gigaset SE361 WLAN).
ì
Click on OK to apply the settings.

Saving and restoring a configuration

Once you have configured your Gigaset SE361 WLAN, it is advisable to back up the set-
tings. Then you can restore them at any time, should they be accidentally deleted or
overwritten.
You can also reset the configuration to the factory settings. You should always do this
before passing your device on to others.
u
In the Administration menu, select Save & Restore.

Saving configuration data

ì
Activate the Save configuration option.
This opens a file selection window where you can specify the file you wish to store
in the backup file.
ì
On your local PC select a directory to which you wish to store the configuration file,
and enter a name for the file.
ì
Click on Save.
Once the procedure has been completed, the current configuration data will have been
saved to the specified file.
68
of the Gigaset SE361 WLAN to be maintained in the