Setting The System - Sharp AQUOS LC-37HV4M Operation Manual

Preparation

Setting the System

After putting the Display and the AVC System in place, connect the system cables and AC cords. Use the
cable clamps for bundling the cables.
1
Removing the terminal cover
2
Connecting the system cable and the AC cord to the Display
3
Connecting the system cable and the AC cord to the AVC System
AVC System (rear view)
CAUTION
• TO PREVENT RISK OF ELECTRIC SHOCK, DO NOT TOUCH UN-INSULATED PARTS OF ANY CABLES WITH THE
AC CORD CONNECTED.
8
Display (rear view)
AC INPUT
110V–240V
Connect the plug into
the terminal and secure
AC cord
it by tightening the
Press the two hooks
toward the centre of the
Display and remove the
cover toward you.
Press down the two
upper hooks to remove
the cover toward you.
DISPLAY INPUT1 DISPLAY INPUT2
(WHITE)
System cable
thumb screws.
System cable
(GREY)
(GREY)
Connect the plug firmly
until the hooks on both
sides click.
(WHITE)
AC cord