Watching A Dvd Image; Connecting A Dvd Player; Displaying A Dvd Image - Sharp AQUOS LC-37HV4M Operation Manual

Using external equipment

Watching a DVD image

Connecting a DVD player

You can use the INPUT 1 terminal when connecting to a DVD player and other audiovisual equipment.
AVC System (rear view)
INPUT SOURCE
TV
INPUT1
INPUT2
INPUT3
INPUT4
PC
TV MENU
Option
Input Select
AUTO
COMPONENT
S-Video
Video
(For INPUT1 signal)
Component cable (commercially available)
AV cable (commercially available)
S-video cable
(commercially available)

Displaying a DVD image

To watch a DVD image, select "INPUT1" from "INPUT
SOURCE" menu using b on the remote control unit
or INPUT on the Display.
Then select "INPUT1" on "Input Select" in the menu to
set the correct input signal type. (See page 51.)
The setting is stored and can be selected in the "INPUT
SOURCE" menu.
• Each time b is pressed, the input source toggles.
• If the DVD image does not come in clearly, you may need
to change the input signal type setting on the "Input Select"
menu.
• Refer to your DVD player operation manual for the signal
type.
NOTE
When using
component cable,
select
"COMPONENT" for
"Input Select" in the
menu.
DVD player
41