I/P Setting; I/P Setting; Dnr (Digital Noise Reduction); Dnr - Sharp AQUOS LC-37HV4E Operation Manual

Basic adjustment settings

I/P setting

Adjusting the image and input signal can give you a
more beautiful picture.
1
Press MENU and the TV MENU screen
displays.
2
Press c/d to select "Picture".
• Picture menu displays.
3
Press a/b to select "Advanced", and then
press ENTER.
4
Press a/b to select "I/P Setting", and then
press ENTER.
• Some items may be greyed out. They are not
selectable.
TV MENU
Picture
Advanced [USER]
C. M. S.
Colour Temp
Black
Monochrome
Film Mode

I/P Setting

DNR

5
Press c/d to select "Interlace" or
"Progressive", and then press ENTER.
Selected item
Use this setting when you cannot get a clear
Interlace
picture with Progressive. (Especially suitable for
media with special effects like game software.)
Progressive Normally, you should select this setting.
NOTE
• The I/P Setting is set to Progressive when Film Mode is "On".
Interlace Progressive
Description

DNR (Digital Noise Reduction)

Produces a clearer video image.
1
Press MENU and the TV MENU screen
displays.
2
Press c/d to select "Picture".
• Picture menu displays.
3
Press a/b to select "Advanced", and then
press ENTER.
TV MENU
Picture
USER
Contrast [+30]
Brightness [0]
Colour [0]
Tint [0]
Sharpness [0]
Advanced
Reset
4
Press a/b to select "DNR", and then press
ENTER.
• Some items may be greyed out. They are not
selectable.
TV MENU
Picture
Advanced [USER]
C. M. S.
Colour Temp
Black
Monochrome
Film Mode
I/P Setting
DNR
5
Press a/b to select the desired level, and
then press ENTER.

Audio

0 +40
–30 +30
+30
–30
+30
–30
+10
–10
Off
High
Low
35