Other Useful Features; Setting When Using External Devices - Sharp AQUOS LC-40LE924RU Operation Manual

Other useful features

Setting when using external
devices
Input source settings
Option
Input select
For setting the signal type of external equipment.
1
Press b to select the input source for
setting the input signal ("EXT 1" or "EXT 3")
from the "INPUT" menu, and then press ;.
2
Go to "Menu" > "Setup" > "Option" >
"Terminal setting" > "Input select".
EXT 1 Y/C, CVBS, RGB
EXT 3 COMPONENT, RGB
NOTE
• If no (colour) image displays, try changing to another
signal type.
• Check the operation manual of the external equipment for the
signal type.
Option
Input label
You can label each input source with a custom
description.
1
Press b to select the desired input source
from the "INPUT" menu, and then press ;.
2
Go to "Menu" > "Setup" > "Option" >
"Terminal setting" > "Input label".
3
Select each character of the new name for the
input source with using the software keyboard
(Page 7).
NOTE
• The label can be six characters or less.
CH list
TV
NOTE
• You cannot change labels if the input source is "TV", "USB",
Home network or Net TV.
44
Item
INPUT
Switchable
Skipping specified inputs
Option
Input skip
This setting allows you to skip the SCART, HDMI, RGB,
ATV, DTV or SAT input on the input source selection
operation.
Go to "Menu" > "Setup" > "Option" > "Input
skip".
Setup
Terminal setting
Input skip
NOTE
• When you select "ATV", "DTV" or "SAT", the skip function works
only when using the # b button on the front of the TV.
[Yes]
[No]
[No]
[No]
[No]
[No]