Harman Stove Company P61-2 Owner's Manual page 17

Fig. 26
Latch "closed "with
blower cover in place.
Burn pot clean-out is
closed.
Fig. 28
Exposed blower wheel
and flue opening,
NOTE: ESP probe is
visible.
Fig. 29
Maintenance
Fig. 27
Latch "open "with
blower cover partly
removed. Burn pot
clean-out is open.
ESP
probe
Blower cover
removed.
ESP Probe
Be careful not to
damage ESP probe
when cleaning with
brush.
7. Open burn pot slide as shown, clean with
vacuum and close.
8. Clean heat exchanger with scraper as shown at
left.
9. Brush or scrape the inside of the stove to
remove fly ash.
10. Scrape burnpot with flat end of scraper pro-
vided with the stove. Fig.31.
11.Slide ash pan into stove and latch into place.
Brush not
supplied. Can be
found in
hardware stores.
Fig. 30
Soot and Fly Ash
The products of combustion will contain
small particles of fly ash. The fly ash will
collect in the exhaust venting system and
restrict the flow of the flue gases. Incom-
plete combustion, such as occurs during
startup, shutdown, or incorrect operation
of the room heater, will lead to some
soot formation which will collect in the
exhaust venting system. The exhaust
venting system should be inspected
at least once every year to determine
if cleaning is necessary.
17
Fig. 31