Preparation; Supplied Accessories; Attaching The Stand Unit - Sharp AQUOS LC-32XL8E Operation Manual

Preparation

Supplied accessories

Remote control unit
(g1)
Pages 3 and 6
• Operation manual (This publication)

Attaching the stand unit

• Before attaching (or detaching) the stand, unplug the AC cord from the AC INPUT terminal.
• Before performing work, spread cushioning over the surface on which you will be laying the TV. This will prevent
it from being damaged.
CAUTION
• Attach the stand in the correct direction.
• Be sure to follow the instructions. Incorrect installation of the stand may result in the TV falling over.
1
Confirm that there are ten screws with the stand
unit.
2
Attach the supporting post for the stand unit
onto the base using the six screws with the
screw driver (supplied) as shown.
Supporting
post
AC cord (g1)
Product shape varies in some countries.
Page 8
Cable clamp (g1)
Page 8
• "AAA" size alkaline battery (g2) ... Page 6
3
Inserting the stand.
1
Insert the stand into the openings on the
bottom of the TV (Hold the stand so it will
not drop from the edge of the base area).
2
Insert and tighten the four short screws into
the four holes on the rear of the TV.
2
NOTE
• To detach the stand unit, perform the steps in reverse
order.
Stand unit (g1)
Page 5
Soft
cushion
1
5