Connecting A Pc; Displaying A Pc Image On The Screen; Selecting The Picture Size - Sharp AQUOS LC-32XL8E Operation Manual

Connecting a PC

Connecting a PC
HDMI Connection
PC
HDMI-certified cable
PC
DVI/HDMI cable
ø 3.5 mm stereo minijack cable
Analogue Connection
PC
ø 3.5 mm stereo minijack cable
DVI/RGB conversion cable
PC
ø 3.5 mm stereo minijack cable
NOTE
• The PC input terminals are DDC1/2B-compatible.
• Refer to page 36 for a list of PC signals compatible with
the TV.
• A Macintosh adaptor may be required for use for some
Macintosh computers.
• When connecting to a PC, the input signal type is
automatically detected except 1,024 g 768 and 1,360 g
768 signals.
EXT4 or 5
EXT6
RGB cable
EXT7
EXT7
Displaying a PC image on the
screen

Selecting the picture size

You can select the picture size.
1
Press f.
• The "WIDE MODE" menu displays.
2
Press f or a/b to select a desired item on the
menu.
NOTE
• Connect the PC before making adjustments.
• Selectable picture size may vary with input signal type.
EXAMPLE
Normal
Item
Full: An image fully fills the screen.
Cinema: For letterbox pictures. Bars may appear on the
top and bottom with some programmes.
Normal: Keeps the original aspect ratio in a full screen
display.
Dot by Dot: Displays an image with the same number of
pixels on the screen.
NOTE
• Refer to page 29 for AV signals (480i/480p/576i/576p/
720p/1080i/1080p). The ANALOGUE RGB terminal (PC)
(EXT7) is not compatible with 480i/576i/1080p signals.
Full
33